Описание материалов:
Formlabs CLEAR resin produces strong plastic parts ideal for a wide variety of applications and is specifically designed to work with your Form 1+ 3D Printer. This material can be easily painted, and when the surface is finished or coated, produces a highly clear part. Upon post-cure, tensile strength and stiffness exceeds that of injection-molded or 3D-printed ABS.
| Главная Информация | |
|---|
| Характеристики | - Жесткий, хороший
- Распылитель
- Хорошая прочность
- Высокое разрешение
|
| Внешний вид | |
| Формы | |
| Метод обработки | |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Модуль растяжения | | | ASTM D638 |
| -- 1 | 2700 | MPa | ASTM D638 |
| -- 2 | 1300 | MPa | ASTM D638 |
| Прочность на растяжение | | | ASTM D638 |
| Yield 3 | 61.5 | MPa | ASTM D638 |
| Yield 4 | 29.8 | MPa | ASTM D638 |
| Удлинение при растяжении | | | ASTM D638 |
| Fracture 5 | 5.0 | % | ASTM D638 |
| Fracture 6 | 20 | % | ASTM D638 |
| Флекторный модуль | | | ASTM D790A |
| -- 7 | 2380 | MPa | ASTM D790A |
| -- 8 | 970 | MPa | ASTM D790A |
| Воздействие | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Зубчатый изод Impact | | | ASTM D256 |
| -- 9 | 29 | J/m | ASTM D256 |
| -- 10 | 22 | J/m | ASTM D256 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Температура отклонения при нагрузке | | | ASTM D648 |
| 0.45 MPa, not annealed 11 | 78.0 | °C | ASTM D648 |
| 0.45 MPa, not annealed 12 | 52.0 | °C | ASTM D648 |
| 1.8 MPa, not annealed 13 | 60.0 | °C | ASTM D648 |
| 1.8 MPa, not annealed 14 | 47.0 | °C | ASTM D648 |
| Дополнительная информация |
|---|
| Material properties can vary with part geometry, print orientation, print settings and temperature. |
| Примечание |
|---|
| 1 . | After exposing green parts to 15 J/cm² of UV light. |
| 2 . | Data was obtained from green parts, printed using 50 µm Clear settings, without additional treatments. |
| 3 . | After exposing green parts to 15 J/cm² of UV light. |
| 4 . | Data was obtained from green parts, printed using 50 µm Clear settings, without additional treatments. |
| 5 . | After exposing green parts to 15 J/cm² of UV light. |
| 6 . | Data was obtained from green parts, printed using 50 µm Clear settings, without additional treatments. |
| 7 . | After exposing green parts to 15 J/cm² of UV light. |
| 8 . | Data was obtained from green parts, printed using 50 µm Clear settings, without additional treatments. |
| 9 . | After exposing green parts to 15 J/cm² of UV light. |
| 10 . | Data was obtained from green parts, printed using 50 µm Clear settings, without additional treatments. |
| 11 . | After exposing green parts to 15 J/cm² of UV light. |
| 12 . | Data was obtained from green parts, printed using 50 µm Clear settings, without additional treatments. |
| 13 . | After exposing green parts to 15 J/cm² of UV light. |
| 14 . | Data was obtained from green parts, printed using 50 µm Clear settings, without additional treatments. |
