- Главная страница
- Поиск продуктов
- LLDPE
- Braskem PE SLL218
Braskem PE SLL218
| Категория | LLDPE, Linear Low Density Polyethylene |
| Производитель | Braskem |
| Торговая марка | Braskem PE |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
wpwo0F_BraskemPESLL218.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
Description:
SLL218 is a Linear Low Density Polyethylene, copolymer of butene-1. Developed for cast film extrusion. Films obtained with this product show a good processing performance balanced with good optical and mechanical properties as well as processability. Very low gel amount. It contains antioxidant additives.
The minimum biobased content of this grade is 87%, determined according to ASTM D6866.
Applications:
Stretch films; liners; LDPE and HDPE blends and packages for general use.
Process:
Recommended processing conditions for film extrusion about 170 - 210 °C. The optimum processing conditions will vary according to the type of equipment used and cannot be considered as performance guarantee.
SLL218 is a Linear Low Density Polyethylene, copolymer of butene-1. Developed for cast film extrusion. Films obtained with this product show a good processing performance balanced with good optical and mechanical properties as well as processability. Very low gel amount. It contains antioxidant additives.
The minimum biobased content of this grade is 87%, determined according to ASTM D6866.
Applications:
Stretch films; liners; LDPE and HDPE blends and packages for general use.
Process:
Recommended processing conditions for film extrusion about 170 - 210 °C. The optimum processing conditions will vary according to the type of equipment used and cannot be considered as performance guarantee.
| Главная Информация | |
|---|---|
| Добавка |
|
| Характеристики |
|
| Используется |
|
| Рейтинг агентства |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельный вес | 0.918 | g/cm³ | ASTM D792 |
| Массовый расход расплава (MFR) (190°C/2.16 kg) | 2.3 | g/10 min | ASTM D1238 |
| Пленки | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Прочность на растяжение | ASTM D882 | ||
| MD : Fracture, 38 µm | 40.0 | MPa | ASTM D882 |
| TD : Fracture, 38 µm | 30.0 | MPa | ASTM D882 |
| Удлинение при растяжении | ASTM D882 | ||
| MD : Fracture, 38 µm | 1300 | % | ASTM D882 |
| TD : Fracture, 38 µm | 1600 | % | ASTM D882 |
| Флекторный модуль | ASTM D790 | ||
| 1% Secant, MD : 38 µm | 200 | MPa | ASTM D790 |
| 1% Secant, TD : 38 µm | 230 | MPa | ASTM D790 |
| Ударное падение Dart 1 | 100 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 38 µm | 150 | g | ASTM D1922 |
| TD : 38 µm | 190 | g | ASTM D1922 |
| Дополнительная информация | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Двуслойное содержание | > 87 | % | ASTM D6866 |
| Примечание | |
|---|---|
| 1 . | F50 |
| Тип материала | Категория | Производитель |
|---|---|---|
| RELENE® F19010 | LLDPE | Reliance Industries Limited |
| CERTENE™ LLHF-116XF | LLDPE | Muehlstein |
| Formolene FORMAX® L71709E2 | LLDPE | Formosa Plastics Corporation, U.S.A. |
| Petrothene® GA502024 | LLDPE | LyondellBasell Industries |
| Petrothene® GA503027 | LLDPE | LyondellBasell Industries |
| SABIC® LLDPE 324CNJ | LLDPE | Saudi Basic Industries Corporation (SABIC) |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved