- Главная страница
- Поиск продуктов
- LLDPE
- DOWLEX™ SC 2111G
DOWLEX™ SC 2111G
| Категория | LLDPE, Polyethylene Resin |
| Производитель | The Dow Chemical Company |
| Торговая марка | DOWLEX™ |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
vngo3q_DOWLEX-SC-2111G.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
DOWLEX™SC 2111G polyethylene resin is specially used in large/high-yield cast film production lines to prepare high-performance industrial stretched films.
The film prepared by DOWLEX SC 2111G polyethylene resin has excellent balance in processing properties, mechanical properties and tensile properties.
DOWLEX SC 211G polyethylene resin is used as a core layer resin in the co-extrusion cast film structure, and a self-adhesive resin is co-extruded to prepare a film with a thickness between 10 and 35 microns.
When used in the application field of food contact, DOWLEX SC 211G polyethylene resin should comply with the requirements of the U.S. Food and Drug Administration Regulation 21 CFR 177.1520 and the requirements of the food contact regulations of most European countries without modification and when the processing process follows the requirements of good manufacturing practices. Please contact your nearest Dow representative for proof of compliance with the Food Contact Act. The purchaser remains responsible for determining whether the use of its products complies with all relevant regulations.
Application field:
The film prepared by DOWLEX SC 2111G polyethylene resin has excellent balance in processing properties, mechanical properties and tensile properties.
DOWLEX SC 211G polyethylene resin is used as a core layer resin in the co-extrusion cast film structure, and a self-adhesive resin is co-extruded to prepare a film with a thickness between 10 and 35 microns.
When used in the application field of food contact, DOWLEX SC 211G polyethylene resin should comply with the requirements of the U.S. Food and Drug Administration Regulation 21 CFR 177.1520 and the requirements of the food contact regulations of most European countries without modification and when the processing process follows the requirements of good manufacturing practices. Please contact your nearest Dow representative for proof of compliance with the Food Contact Act. The purchaser remains responsible for determining whether the use of its products complies with all relevant regulations.
Application field:
- cast stretch film for tray
| Главная Информация | |
|---|---|
| Рейтинг агентства |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельный вес | 0.920 | g/cm³ | ASTM D792 |
| Массовый расход расплава (MFR) (190°C/2.16 kg) | 3.7 | g/10 min | ISO 1133 |
| Пленки | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Толщина пленки протестирована | 23 | µm | |
| Сила прокола пленки 1(23 µm) | 31.0 | N | Internal method |
| Tensile Stress 2 | ISO 527-3 | ||
| MD : Yield, 23 µm | 5.80 | MPa | ISO 527-3 |
| TD : Yield, 23 µm | 6.00 | MPa | ISO 527-3 |
| MD : Break, 23 µm | 34.0 | MPa | ISO 527-3 |
| TD : Break, 23 µm | 25.0 | MPa | ISO 527-3 |
| Удлинение при растяжении 3 | ISO 527-3 | ||
| MD : Break, 23 µm | 430 | % | ISO 527-3 |
| TD : Break, 23 µm | 690 | % | ISO 527-3 |
| Ударное падение Dart 4(23 µm) | 110 | g | ISO 7765-1/A |
| Elmendorf Tear Strength 5 | ASTM D1922 | ||
| MD : 23 µm | 170 | g | ASTM D1922 |
| TD : 23 µm | 550 | g | ASTM D1922 |
| Растяжимые свойства пленки-максимальная сила растяжения | 36000 | g | Internal method |
| Свойства растяжения пленки-максимальное удлинение | 350 | % | Internal method |
| Оптический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Блеск 6(45°, 23.0 µm) | 93 | ASTM D2457 | |
| Haze 7(23.0 µm) | 0.60 | % | ISO 14782 |
| Экструзия | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Температура расплава | 250 | °C |
| Инструкции по экструзии |
|---|
| 铸造薄膜的制造条件： 冷却辊温度：25°C 熔体温度：250°C 建议的厚度范围：10 至 35 µm |
| Примечание | |
|---|---|
| 1 . | Cast film manufactured at 250 m/min. |
| 2 . | Cast film manufactured at 250 m/min. |
| 3 . | Cast film manufactured at 250 m/min. |
| 4 . | Cast film manufactured at 250 m/min. |
| 5 . | Cast film manufactured at 250 m/min. |
| 6 . | Cast film manufactured at 250 m/min. |
| 7 . | Cast film manufactured at 250 m/min. |
| Тип материала | Категория | Производитель |
|---|---|---|
| SABIC® LLDPE 6821W | LLDPE | Saudi Basic Industries Corporation (SABIC) |
| TAISOX 2110 | LLDPE | Formosa Plastics Corporation |
| Titanvene™ LL0209SR | LLDPE | PT. TITAN Petrokimia Nusantara |
| Braskem PE PLURIS 9300 | LLDPE | Braskem |
| HIFOR® LT74105 | LLDPE | Westlake Chemical Corporation |
| Ferro PE JPE65HJ01BK | LLDPE | Ferro Corporation |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved