- Главная страница
- Поиск продуктов
- HDPE
- SABIC® HDPE B6246LS
SABIC® HDPE B6246LS
| Категория | HDPE, High Density Polyethylene |
| Производитель | Saudi Basic Industries Corporation (SABIC) |
| Торговая марка | SABIC® HDPE |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
v3U5GH_SABIC-HDPE-B6246LS.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
SABIC® HDPE B6246LS is typically used in food and beverage packaging, offering good purity and organoleptics as well as recycle ability. It combines a high rigidity with very good processing performance, which offers potential for system cost reduction.
The grade is typically used for the blow moulding of mono as well as multi layer bottles in several food markets, like fresh, pasteurised and ultra heat treated milk, sauces, orange juice, functional drinks, probiotics and other "daily shot" drinks. The material properties offer the possibility to reduce weight at good top load strength.
This slip agent free grade is also typically used for the injection moulding of caps & closures for carbonated soft drinks and sparkling water as well as high environmental stress crack resistant applications, like UN-pails and UN-caps & closures.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
The grade is typically used for the blow moulding of mono as well as multi layer bottles in several food markets, like fresh, pasteurised and ultra heat treated milk, sauces, orange juice, functional drinks, probiotics and other "daily shot" drinks. The material properties offer the possibility to reduce weight at good top load strength.
This slip agent free grade is also typically used for the injection moulding of caps & closures for carbonated soft drinks and sparkling water as well as high environmental stress crack resistant applications, like UN-pails and UN-caps & closures.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
| Главная Информация | |
|---|---|
| Характеристики |
|
| Используется |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Плотность | 0.962 | g/cm³ | ISO 1183 |
| Массовый расход расплава (MFR) | ISO 1133 | ||
| 190°C/2.16 kg | 0.50 | g/10 min | |
| 190°C/21.6 kg | 46 | g/10 min | |
| 190°C/5.0 kg | 2.5 | g/10 min | |
| Экологическое сопротивление растрескиванию (10% Igepal CO-630, Compression Molded, F50) | 15.0 | hr | ASTM D1693B |
| Твердость | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Твердость по суше (Shore D, Compression Molded) | 64 | ISO 868 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Модуль растяжения (2.00 mm, Compression Molded) | 1300 | MPa | ISO 527-2/1BA/50 |
| Tensile Stress | ISO 527-2/1BA/50 | ||
| Yield, 2.00 mm, Compression Molded | 29.0 | MPa | |
| Break, 2.00 mm, Compression Molded | 18.0 | MPa | |
| Растяжимое напряжение (Break, 2.00 mm, Compression Molded) | > 1000 | % | ISO 527-2/1BA/50 |
| Флекторный модуль (2.00 mm, Compression Molded) | 1600 | MPa | ISO 178 |
| Флекторный стресс (2.00 mm, Compression Molded) | 31.0 | MPa | ISO 178 |
| Воздействие | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Зубчатый изод ударная прочность | ISO 180/A | ||
| -30°C, Compression Molded | 7.0 | kJ/m² | |
| 23°C, Compression Molded | 13 | kJ/m² |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 89.0 | °C | ISO 75-2/B |
| Викат Температура размягчения | 129 | °C | ISO 306/A |
| Температура плавления (DSC) | 135 | °C | ISO 11357-3 |
| Enthalpy Change | 225 | J/g | ISO 11357-3 |
| Тип материала | Категория | Производитель |
|---|---|---|
| YUZEX® 8810 | HDPE | SK Global Chemical |
| Bapolene® 3255 | HDPE | Bamberger Polymers, Inc. |
| Exelene® HDPE 5100M | HDPE, HMW | Montachem International, Inc. |
| Formolene® HB6007 | HDPE | Formosa Plastics Corporation, U.S.A. |
| InnoPlus HD2200JP | HDPE | PTT Global Chemical Public Company Limited |
| Witcom HDPE AS-S-UV | HDPE | Witcom Engineering Plastics B.V. |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved