- Главная страница
- Поиск продуктов
- PI
- P84® NT1 15G
P84® NT1 15G
| Категория | PI, Thermoplastic Polyimide , PI, TP |
| Производитель | Evonik Industries AG |
| Торговая марка | P84® |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
maHkqp_P84-NT1-15G.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
Advantages of Polyimide P84®NT
To overcome the above-mentioned limitations, Evonik Fibres GmbH is now offering Polyimide P84®NT in powder or granulate form, which is processable by employing common sinter technologies such as hot compression moulding or direct forming. The high mechanical stability and the impact resistance of P84®NT parts ensure good machinability with standard tools.
Parts made of Polyimide P84®NT are excellent performers in thermally and mechanically stressed applications. This novel material features a high glass transition temperature of 337-364°C and a rigid structure (3705 MPa flexural modulus, 188 MPa strength in a three-point-bending experiment), combined with a high elongation at break of over 11 percent.
To overcome the above-mentioned limitations, Evonik Fibres GmbH is now offering Polyimide P84®NT in powder or granulate form, which is processable by employing common sinter technologies such as hot compression moulding or direct forming. The high mechanical stability and the impact resistance of P84®NT parts ensure good machinability with standard tools.
Parts made of Polyimide P84®NT are excellent performers in thermally and mechanically stressed applications. This novel material features a high glass transition temperature of 337-364°C and a rigid structure (3705 MPa flexural modulus, 188 MPa strength in a three-point-bending experiment), combined with a high elongation at break of over 11 percent.
| Главная Информация | |
|---|---|
| Наполнитель/армирование |
|
| Характеристики |
|
| Используется |
|
| Формы |
|
| Метод обработки |
|
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Модуль растяжения | 4000 | MPa | ISO 527-2 |
| Tensile Stress | 103 | MPa | ISO 527-2 |
| Растяжимое напряжение (Break) | 6.0 | % | ISO 527-2 |
| Компрессионный модуль | 1880 | MPa | ISO 604 |
| Сжимающее напряжение | 269 | MPa | ISO 604 |
| Compressive Strain at Break | 41 | % | ISO 604 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 345 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 335 | °C | ISO 75-2/Af |
| Тип материала | Категория | Производитель |
|---|---|---|
| APICAL 30AV | Film, PI | Kaneka North America LLC |
| APICAL 500AV | PI, TS | Kaneka Corporation |
| APICAL 300AV | PI, TS | Kaneka Corporation |
| APICAL 150AF019 | Film, PI | Kaneka Corporation |
| RTP 4285 TFE 5 | PI, TP | RTP Company |
| Plavis® C | PI, TP | Comco Nylon GmbH |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved