- Главная страница
- Поиск продуктов
- PMMA/PVC
- Boltaron 9915 FSTH
Boltaron 9915 FSTH
| Категория | PMMA/PVC, Acrylic (PMMA) + PVC , PMMA+PVC |
| Производитель | Boltaron Performance Products |
| Торговая марка | Boltaron |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
h7a4Rv_Boltaron-9915-FSTH.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
Fully Compliant Aircraft Grade Thermoplastic Sheet - Airbus and Boeing compliance never looked so good
With Boltaron 9915 FSTH, designers now have the flexibility to produce visually stunning aircraft interior components, while also meeting all Boeing and Airbus requirements for flammability, smoke, toxicity, and heat release.
Constructed with Lexan XHR6000 high performance thermoplastic sheet manufactured by SABIC Innovative Plastics, Boltaron 9915 FSTH is a proprietary composite offered in a combination of decorative designs, colors, and textures unavailable from any other film and sheet supplier.
Offered in decorative effects such as wood-grain, pearlescent, and carbon-fiber, Boltaron 9915 FSTH gives designers the flexibility to produce eye-popping 2-and 3- dimensional seating components, shrouds, and panels. In addition, Boltaron 9915 FSTH is the only fully compliant aircraft grade thermoplastic sheet with a low- gloss surface after thermoforming, allowing for consistent part-to-part appearance.
With an unparalleled combination of physical properties and design flexibility, compliance with toxicity standards never looked better.
Meets toxicity requirements per ABD0031, BSS7239, and D6-5137
With Boltaron 9915 FSTH, designers now have the flexibility to produce visually stunning aircraft interior components, while also meeting all Boeing and Airbus requirements for flammability, smoke, toxicity, and heat release.
Constructed with Lexan XHR6000 high performance thermoplastic sheet manufactured by SABIC Innovative Plastics, Boltaron 9915 FSTH is a proprietary composite offered in a combination of decorative designs, colors, and textures unavailable from any other film and sheet supplier.
Offered in decorative effects such as wood-grain, pearlescent, and carbon-fiber, Boltaron 9915 FSTH gives designers the flexibility to produce eye-popping 2-and 3- dimensional seating components, shrouds, and panels. In addition, Boltaron 9915 FSTH is the only fully compliant aircraft grade thermoplastic sheet with a low- gloss surface after thermoforming, allowing for consistent part-to-part appearance.
With an unparalleled combination of physical properties and design flexibility, compliance with toxicity standards never looked better.
Meets toxicity requirements per ABD0031, BSS7239, and D6-5137
| Главная Информация | |
|---|---|
| Характеристики |
|
| Используется |
|
| Рейтинг агентства |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельный вес | 1.34 | g/cm³ | ASTM D792 |
| Формовочная усадка- Поток (Thermoformed) | 0.50 to 0.70 | % |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Прочность на растяжение | 73.1 | MPa | ASTM D638 |
| Флекторный модуль | 2500 | MPa | ASTM D790 |
| Flexural Strength | 115 | MPa | ASTM D790 |
| Воздействие | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Зубчатый изод Impact (23°C) | 190 | J/m | ASTM D256 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Температура отклонения при нагрузке (1.8 MPa, Unannealed) | 121 | °C | ASTM D648 |
| CLTE- Поток (-40 to 40°C) | 5.8E-5 | cm/cm/°C | ISO 11359-2 |
| Воспламеняемость | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Воспламеняемость | |||
| -- | Pass | FAR 25.853(d) | |
| 12 sec | Pass | FAR 25.853 | |
| 60 sec | Pass | FAR 25.853 | |
| Теплоотвод 1 | FAR 25.853 | ||
| 2 min | < 65 | kW·min/m² | |
| Peak | < 65 | kW/m² | |
| Токсичность дыма 2 | Pass |
| Дополнительная информация | Номинальное значение | Метод испытания | |
|---|---|---|---|
| Ds | ASTM F814 | ||
| 1.5 min | < 100 | ||
| 4 min | < 200 |
| Примечание | |
|---|---|
| 1 . | A1 F, Part IV |
| 2 . | ABD-0031, BSS-7239, D6-51377 |
| Тип материала | Категория | Производитель |
|---|---|---|
| KYDEX® 5555 | PMMA+PVC | SEKISUI Polymer Innovations, LLC |
| KYDEX® T | PMMA+PVC | SEKISUI Polymer Innovations, LLC |
| Royalite R72 | PMMA+PVC | Spartech Plastics |
| Boltaron 4335 | PMMA+PVC | Boltaron Performance Products |
| Vikalloy IM75 | PMMA+PVC | Viking Polymers, LLC |
| Boltaron 9915 FSTH | PMMA+PVC | Boltaron Performance Products |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved