Purgex™ 456 Plus

Категория	PE, Polyethylene , PE, Unspecified
Производитель	Neutrex, Inc.
Торговая марка	Purgex™
Порт	Китай Шанхайский порт
Торговые условия	FOB, CFR, CIF
Платежное средство	L/C, T/T, Western Union
PDF	WkBN75_Purgex-456-Plus.pdf
Контактная информация	EMAIL US  sales@su-jiao.com Служба поддержки клиентов Вичат

Описание материалов:

Blend, polyethylene, and FDA-approved active component

Non-toxic, non-abrasive, and safe

Ready to use and easy to remove

Temperature Range:

Operating temperature range of 280°F to 550°F (138°C to 288°C)

Applications:

PURGEX 456 Plus is used for color and/or material changes and the removal of residual contamination in thermoplastic injection molding, extrusion, or blow molding equipment.

PURGEX 456 Plus will efficiently purge the barrel, screw, and nozzle, as well as hot runners. This blend removes all types of colorants and commodity resins, including polypropylene, polyethylene, and their copolymers. PURGEX 456 Plus is used to neutralize HCl gasses in PVC purging applications. PURGEX 456 Plus assures rapid turnaround on color and material changes with polyolefins and their copolymers, styrenics polymers, acetals, vinyls, TPO, TPU, and many more resins processed in this temperature range.

Главная Информация
Используется	Очистительная смесь
Метод обработки	Экструзия Литье под давлением

Инструкции по впрыску
Empty barrel of production resin. Add PURGEX 456 Plus to the hopper (a minimum of 1.5 times the injection capacity). Purge the barrel until PURGEX exits the nozzle. Soak five minutes at processing temperature with barrel full and screw in forward position. Purge barrel to empty. Follow with next production resin, rinsing PURGEX from machine. Resume molding.

Инструкции по экструзии
Empty extruder. Remove screen. Seal vent. Fill extruder with PURGEX 456 Plus. Make certain extruder is full and PURGEX is exiting the nozzle as a foaming material. Soak five minutes at processing temperature. Add the next resin to be extruded and remove all PURGEX from the extruder. When it appears that PURGEX has been completely removed, replace the screen, open the vent, and commence production.

Инструкции по экструзии

Empty extruder. Remove screen. Seal vent. Fill extruder with PURGEX 456 Plus. Make certain extruder is full and PURGEX is exiting the nozzle as a foaming material. Soak five minutes at processing temperature. Add the next resin to be extruded and remove all PURGEX from the extruder. When it appears that PURGEX has been completely removed, replace the screen, open the vent, and commence production.

Тип материала	Категория	Производитель
EverGlide® MB450	PE, Unspecified	Polymer Dynamix
REVOLVE® M-776	PE, Unspecified	Matrix Polymers
Sindustris PE XL8081NT	PE, Unspecified	Sincerity Australia Pty Ltd.
Favorite REG200	PE, Unspecified	Favorite Plastics
Ferro PE NPE00IA02NA	PE, Unspecified	Ferro Corporation
Hyundai EP Adhesives LE340T/1002	PE, Unspecified	HYUNDAI EP Co., Ltd.

Получите информацию об этом продукте следующим способом.

Телефон	+086 13424755533
EMAIL US	sales@su-jiao.com
Служба поддержки клиентов Вичат

