- Главная страница
- Поиск продуктов
- LDPE
- ALCUDIA® LDPE 1970C
ALCUDIA® LDPE 1970C
| Категория | LDPE, Low Density Polyethylene |
| Производитель | REPSOL |
| Торговая марка | ALCUDIA® LDPE |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
VWiN5m_ALCUDIA-LDPE-1970C.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
ALCUDIA® 1970C is a low density polyethylene grade, produced by high pressure autoclave technology, suitable for extrusion coating. Very high drawdown speeds are achieved throughout the extrusion temperature range, and thin coatings are possible at low temperatures. The molecular structure of the polymer produces an excellent clear coating. It has good heat sealability and moisture barrier properties. Its melt characteristics guarantee good adhesion and low neck-in. There are no smoke or odour problems, even at high temperatures. Contains no additives.
TYPICAL APPLICATIONS
The excellent draw down properties of ALCUDIA® 1970C allow high-speed coatings, up to 850 m/min and 5 g/m² at a maximum extrusion temperature of 330°C.
This material has a very low neck-in throughout a wide range of extrusion conditions.
Recommended melt temperature range for extrusion coating from 275 to 330°C.
Temperature range for coextrusion depending on the processed polymers.
Processing conditions should be optimised for each production line.
TYPICAL APPLICATIONS
- Extrusion coating.
- Coextruded thin film.
- Injection moulding.
The excellent draw down properties of ALCUDIA® 1970C allow high-speed coatings, up to 850 m/min and 5 g/m² at a maximum extrusion temperature of 330°C.
This material has a very low neck-in throughout a wide range of extrusion conditions.
Recommended melt temperature range for extrusion coating from 275 to 330°C.
Temperature range for coextrusion depending on the processed polymers.
Processing conditions should be optimised for each production line.
| Главная Информация | |
|---|---|
| Характеристики |
|
| Используется |
|
| Рейтинг агентства |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Плотность (23°C) | 0.920 | g/cm³ | ISO 1183 |
| Массовый расход расплава (MFR) (190°C/2.16 kg) | 7.5 | g/10 min | ISO 1133 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Викат Температура размягчения | 89.0 | °C | ISO 306/A |
| Экструзия | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Температура расплава | 275 - 330 | °C |
| Инструкции по экструзии |
|---|
| Maximum Coating Speed: 850 m/minMinimum Coating Weight: 5 g/m²Total Neck-in: 68 mm |
| Тип материала | Категория | Производитель |
|---|---|---|
| Sanren Q280 (1st-grade) | LDPE | SINOPEC Shanghai Petrochemical Co. Ltd. |
| TOTAL Polyethylene LDPE 1200 MN 18 C | LDPE | TOTAL Refining & Chemicals |
| Yanshan PE LD166 | LDPE | SINOPEC Beijing Yanshan Petrochemical |
| PETILEN G08-21TA | LDPE | PETKIM Petrokimya Holding A.S. |
| Petrothene® NA373244 | LDPE | LyondellBasell Industries |
| Epolene® E-16 | LDPE | Westlake Chemical Corporation |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved