- Главная страница
- Поиск продуктов
- Urea Formaldehyde
- Urochem 136
Urochem 136
| Категория | Urea Formaldehyde , Urea Formald |
| Производитель | Chemiplastica, Inc. |
| Торговая марка | Urochem |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
SRcUTm_Urochem-136.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
Urea- formaldehyde resins fortified with highly refined cellulose as filler, and further modified with minor amounts of special purpose additives, pigments, cure regulators and lubricants.
The Urochem 136 Moulding Compounds can be supplied in an almost unlimited range of colours from translucent light pastels to black.
Moulded parts are free from odour; UV stable with good moisture resistance.
Hard, glossy and scratch resistant surface.
Excellent chemical resistance. Fats, oils and common organic solvents like alcohol and acetone do not attack moulded parts which are also resistant to surfactants and weak bases. They will withstand attack from weak acids for a shorter duration.
Excellent electrical properties (arc quenching, tracking, flame resistance). Oxygen index of 30% is achieved without the use of external flame retardants. No halogens are present in the composition.
Compliant with the requirements of widely used material specifications for amino compounds:
BS 1322 type UF A10 (*)
DIN 7708 type 131.5 (*)
ISO 2112 type UF A10 (*)
UL certified
(*) included in ISO 14527
Fields of application: Optimized for use primarily in the thermoset injection moulding process.
Particularly well suited for electrical components such as sockets, lamp holders, and domestic circuit breakers.
The Urochem 136 Moulding Compounds can be supplied in an almost unlimited range of colours from translucent light pastels to black.
Moulded parts are free from odour; UV stable with good moisture resistance.
Hard, glossy and scratch resistant surface.
Excellent chemical resistance. Fats, oils and common organic solvents like alcohol and acetone do not attack moulded parts which are also resistant to surfactants and weak bases. They will withstand attack from weak acids for a shorter duration.
Excellent electrical properties (arc quenching, tracking, flame resistance). Oxygen index of 30% is achieved without the use of external flame retardants. No halogens are present in the composition.
Compliant with the requirements of widely used material specifications for amino compounds:
BS 1322 type UF A10 (*)
DIN 7708 type 131.5 (*)
ISO 2112 type UF A10 (*)
UL certified
(*) included in ISO 14527
Fields of application: Optimized for use primarily in the thermoset injection moulding process.
Particularly well suited for electrical components such as sockets, lamp holders, and domestic circuit breakers.
| Главная Информация | |
|---|---|
| Наполнитель/армирование |
|
| Добавка |
|
| Характеристики |
|
| Используется |
|
| Соответствие RoHS |
|
| Внешний вид |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Плотность | 1.50 | g/cm³ | ISO 1183 |
| Формовочная усадка | ISO 2577 | ||
| -- 1 | 0.80 - 1.1 | % | ISO 2577 |
| -- | 0.80 - 1.0 | % | ISO 2577 |
| Поглощение воды | mg | ISO 62 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Tensile Stress (Yield) | > 55.0 | MPa | ISO 527-2 |
| Флекторный стресс | > 150 | MPa | ISO 178 |
| Воздействие | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Ударная прочность | > 1.6 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | > 12 | kJ/m² | ISO 179/1eU |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 1.8 MPa, not annealed | > 130 | °C | ISO 75-2/A |
| 8.0 MPa, not annealed | > 90.0 | °C | ISO 75-2/C |
| Электрический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельное сопротивление поверхности | 1.1E+11 | ohms | IEC 60093 |
| Сопротивление громкости | 1.1E+11 | ohms·cm | IEC 60093 |
| Диэлектрическая постоянная | 5.00 | DIN 53483 | |
| Comparative Tracking Index | > 600 | V | IEC 60112 |
| Воспламеняемость | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Огнестойкость | V-0 | UL 94 | |
| Индекс воспламеняемости провода свечения 2 | 960 | °C | IEC 707 |
| Индекс кислорода | > 30 | % | ASTM D2863 |
| Инъекция | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Температура сопла | 95.0 - 115 | °C | |
| Температура формы | 145 - 160 | °C | |
| Давление впрыска | 70.0 - 150 | MPa | |
| Удерживающее давление | 30.0 - 80.0 | MPa | |
| Back Pressure | 10.0 - 14.0 | MPa |
| Инструкции по впрыску |
|---|
| Hydraulic injection pressure: 50 to 170 barHydraulic back pressure: 7 to 11 barInjection speed: 100 to 200 cm³/sBarrel inlet temp: 70 to 85°C |
| Примечание | |
|---|---|
| 1 . | Post-shrink |
| 2 . | 180 sec |
| Тип материала | Категория | Производитель |
|---|---|---|
| Urochem 161 | Urea Formald | Chemiplastica, Inc. |
| Urochem 371 | Urea Formald | Chemiplastica, Inc. |
| Urochem 191 | Urea Formald | Chemiplastica, Inc. |
| SCARAB SB | Urea Formald | BIP (Oldbury) Limited |
| Urochem 134 | Urea Formald | Chemiplastica, Inc. |
| Urochem 136 | Urea Formald | Chemiplastica, Inc. |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved