Prime PE HMWPE 1000 Swirl

This product consists of a HMWPE substrate with a three-color swirlcap of HMWPE. The swirl can beon one or both sides of the sheet.The thickness can be varied to suityour specific material requirementsand draw ratios.

Applications:
Applications so far have consisted of playground equipment, camouflage deer blinds, canoes, and other sporting equipment.

Processing:
This is a crystalline material, therefore, good forming practices should be applied when forming this product. Forming temperature is 310-360°F. Mold temperature should be 160-200°F. Aluminum mold with grit blasted surface is preferred. The tool should be designed with a moat on the outsideof the trim line. Mold shrink is .016 -.028 in/in.

Finishing:
Prime HMWPE 1000 Swirl can be fabricated by using techniques such as; drilling, routing, punching, sawing and cutting with a die, laser or water jet. Mechanical screws and other type of fasteners can be used. The CLTE is high, therefore, movement of the part must be considered.

Please contact your Primex Plastics representative formore information on finishing,fabricating, or the thermoforming process.

Colors, Textures and Capabilities:
Prime HMWPE 1000 Swirl can be color matched to meet your specific requirements. Prime HMWPE 1000 Swirl is extruded in gauges of .100 to .300 and up to 90" in width.Textures include; Smooth or Levant ll.