- Главная страница
- Поиск продуктов
- HDPE
- INTREPID™ 2499 NT
INTREPID™ 2499 NT
| Категория | HDPE, Bimodal Polyethylene Resin |
| Производитель | The Dow Chemical Company |
| Торговая марка | INTREPID™ |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
Po1EyS_INTREPID-2499-NT.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
INTREPID™ 2499 NT Bimodal Polyethylene Resin is a Polyethylene resin produced using UNIPOL II process technology. This product is intended for use in industrial piping systems where extreme conditions such as high temperatures, aggressive chemicals, hydrocarbons, or highly oxidative conditions exist. Suitable uses include oil and gas field pipelines, gas distribution pipelines, and other industrial applications.
Industrial Standards Compliance:
ASTM D3350: cell classification:
Plastics Pipe Institute (PPI): TR-4
NSF International: Standard 14 and 61
NOTES:
(1)The first 5 numbers of the cell classification are based on natural resin. The last number and letter are based on black resin. (Natural resin plus 6.5% DFNF-0092).
Industrial Standards Compliance:
ASTM D3350: cell classification:
- Natural - PE445574A CC0
- Black - PE445574C CC3 (See NOTES)
Plastics Pipe Institute (PPI): TR-4
- Natural Pipe INTREPID™ 2499 NT Bimodal Polyethylene Resin
- ASTM PE4710 pipe grade - 1600psi HDB @ 73 °F (23°C)
- ASTM PE4710 pipe grade - 800psi HDB @ 180 °F (82.2°C)
- Black Pipe INTREPID™ 2499 BK Bimodal Polyethylene Resin
- ASTM PE4710 pipe grade - 1600psi HDB @ 73 °F (23°C)
- ASTM PE4710 pipe grade - 800psi HDB @ 180 °F (82.2°C)
NSF International: Standard 14 and 61
- Black Pipe INTREPID™ 2499 Black (See NOTES)
NOTES:
(1)The first 5 numbers of the cell classification are based on natural resin. The last number and letter are based on black resin. (Natural resin plus 6.5% DFNF-0092).
| Главная Информация | |
|---|---|
| Добавка |
|
| Рейтинг агентства |
|
| Внешний вид |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельный вес | ASTM D792 | ||
| natural color 1 | 0.950 | g/cm³ | ASTM D792 |
| Black 2 | 0.960 | g/cm³ | ASTM D792 |
| Массовый расход расплава (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.10 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 7.0 | g/10 min | ASTM D1238 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Прочность на растяжение 3(Yield) | > 24.1 | MPa | ASTM D638 |
| Удлинение при растяжении 4(Break) | > 500 | % | ASTM D638 |
| Флекторный модуль | 1050 | MPa | ASTM D790B |
| Медленное распространение трещин @ 2,4 МПа 5 | ASTM F1473 | ||
| 80°C | > 10000 | hr | ASTM F1473 |
| 90°C | > 6000 | hr | ASTM F1473 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Термическая стабильность | > 220 | °C | ASTM D3350 |
| Воздействие | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Зубчатый изод Impact 6(23°C) | 490 | J/m | ASTM D256A |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Температура ломкости 7 | < -75.0 | °C | ASTM D746A |
| Температура плавления (DSC) | 132 | °C | Internal method |
| Инструкции по экструзии |
|---|
| Fabrication Conditions: Screw Type: High quality HDPE barrier with mixing Melt Temperature Range: 380-450°F (193-232°C) |
| Примечание | |
|---|---|
| 1 . | Natural resin |
| 2 . | Typical properties: these are not to be construed as specifications. |
| 3 . | Compression molded parts prepared according to ASTM D 1928 Procedure C. Properties will vary with changes in molding conditions and aging time. |
| 4 . | Compression molded parts prepared according to ASTM D 1928 Procedure C. Properties will vary with changes in molding conditions and aging time. |
| 5 . | Compression molded parts prepared according to ASTM D 1928 Procedure C. Properties will vary with changes in molding conditions and aging time. |
| 6 . | Compression molded parts prepared according to ASTM D 1928 Procedure C. Properties will vary with changes in molding conditions and aging time. |
| 7 . | Compression molded parts prepared according to ASTM D 1928 Procedure C. Properties will vary with changes in molding conditions and aging time. |
| Тип материала | Категория | Производитель |
|---|---|---|
| MarFlex® 9608XD | HDPE | Chevron Phillips Chemical Company LLC |
| SNOLEN® EP 0.26/51 Y | HDPE | JSC Gazprom neftekhim Salavat |
| Alathon® M5010 | HDPE | LyondellBasell Industries |
| Braskem PE GP 100OR | HDPE | Braskem |
| HIDEN® B502 | HDPE | YUHWA Korea Petrochemical Ind. Co., Ltd. |
| Hostalen CRP 100 RESIST CR orange | HDPE | LyondellBasell Industries |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved