Описание материалов:
Baydur 665 IBS is a black-pigmented, rigid polyurethane structural foam system used in the reaction injection molding (RIM) process. This system incorporates a specially engineered interactive blowing system (IBS) and is supplied as two reactive liquid components. Component A is a polymeric diphenylmethane diisocyanate (PMDI), and Component B is a formulated polyol system containing no CFC- or HCFC-blowing additives. Note: Component B should be agitated thoroughly prior to delivery of drum contents to day tank due to possible pigment settling.
The Baydur 665 IBS system is used for general-purpose applications that require injection times longer than 10 seconds. The applications, typically found in the construction, furniture, and transportation markets, take advantage of the material's strength as well as its excellent surface finish, large part capability, and good flowability. As with any product, use of the Baydur 665 IBS system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.
Главная Информация | |
---|
Характеристики | - Хорошая мобильность
- Хорошая прочность
- Универсальный
- Отличный внешний вид
|
Используется | - Структурная пена
- Мебель
- Универсальный
|
Внешний вид | |
Метод обработки | - Литье под давлением реакции (обод)
|
Физический | Номинальное значение | Единица измерения | Метод испытания |
---|
Удельный вес | 0.399 | g/cm³ | ASTM D792 |
Формовочная усадка-
Поток (12.7 mm) | 0.30 - 0.50 | % | ASTM D955 |
Твердость | Номинальное значение | Единица измерения | Метод испытания |
---|
Твердость дюрометра (Shore D, 12.7 mm) | 70 | | ASTM D2240 |
Механические | Номинальное значение | Единица измерения | Метод испытания |
---|
Прочность на растяжение (Break, 12.7 mm) | 19.3 | MPa | ASTM D638 |
Удлинение при растяжении (Break, 12.7 mm) | 7.0 | % | ASTM D638 |
Флекторный модуль (12.7 mm) | 779 | MPa | ASTM D790 |
Flexural Strength (12.7 mm) | 34.5 | MPa | ASTM D790 |
Воздействие | Номинальное значение | Единица измерения | Метод испытания |
---|
Charpy Unnotched Impact Strength 1 | 13 | kJ/m² | Internal method |
Тепловой | Номинальное значение | Единица измерения | Метод испытания |
---|
Температура отклонения при нагрузке (0.45 MPa, unannealed, 12.7mm) | 100 | °C | ASTM D648 |
Термокомплект | Номинальное значение | | |
---|
Компоненты термокомплекта | | | |
Component a | Mixing ratio by weight: 120 | | |
Component B | Mixing ratio by weight: 100 | | |
Дополнительная информация |
---|
Part A
Type: Isocyanate
Appearance: Dark brown liquid
Specific Gravity @ 25°C: 1.24
Viscosity @25°C: 200 cps
Flash Point PMCC: 199°C
NCO: 31.0 max wt%
Part B
Type: Polyol
Appearance: Black liquid
Specific Gravity @ 25°C: 1.05
Viscosity @25°C: 2000 cps
Flash Point PMCC: 130°C
Water: 0.4 wt%
Hydroxyl Number: 465 KOH/g
Material Temperatures: 32 to 38°CMold Temperature: 60 to 70°CHand Mix Reactivity at 25°C
Cream Time: 45 sec
Gel Time: 90 sec
Tack Free Time: 115 sec
Free-Rise Density: 12 lb/ft³
Polyol Nucleation Specific Gravity: 0.80 to 0.85 0Typical cure Time, 0.250 in Thickness: 4 to 5 |