- Главная страница
- Поиск продуктов
- HDPE
- Bynel® 4033
Bynel® 4033
| Категория | HDPE, High Density Polyethylene |
| Производитель | DuPont Packaging & Industrial Polymers |
| Торговая марка | Bynel® |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
O9FmeU_Bynel-4033.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
BYNEL® Series 4000 resins are anhydride-modified, high-density polyethylene resins. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins.
BYNEL 4033 is a grade with a higher level of anhydride modification, and is mainly intended for use as a component in a blend with other polyolefin resins. It is not intended for extrusion in its pure form in typical extrusions or coextrusions.
BYNEL Series 4000 resins are excellent moisture barriers and have a good hydrocarbon resistance. This unique combination of properties makes them useful in a variety of coextrusion applications. HDPE/EVOH tubing and HDPE/polyamide bottles for agricultural chemicals are two examples.
BYNEL 4000 series resins are most often used in coextrusion with EVA, EVOH, polyamide and PE.
BYNEL 4033 is a grade with a higher level of anhydride modification, and is mainly intended for use as a component in a blend with other polyolefin resins. It is not intended for extrusion in its pure form in typical extrusions or coextrusions.
BYNEL Series 4000 resins are excellent moisture barriers and have a good hydrocarbon resistance. This unique combination of properties makes them useful in a variety of coextrusion applications. HDPE/EVOH tubing and HDPE/polyamide bottles for agricultural chemicals are two examples.
BYNEL 4000 series resins are most often used in coextrusion with EVA, EVOH, polyamide and PE.
| Главная Информация | |
|---|---|
| Характеристики |
|
| Используется |
|
| Рейтинг агентства |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельный вес | 0.950 | g/cm³ | ASTM D792, ISO 1183 |
| Массовый расход расплава (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238, ISO 1133 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Викат Температура размягчения | 128 | °C | ASTM D1525, ISO 306 |
| Пиковая температура плавления | 135 | °C | ASTM D3418, ISO 3146 |
| Freezing Point | 114 | °C | ASTM D3418 |
| Экструзия | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Зона цилиндра 1 темп. | 160 | °C | |
| Зона цилиндра 2 температура. | 185 | °C | |
| Зона цилиндра 3 темп. | 235 | °C | |
| Зона цилиндра 4 темп. | 235 | °C | |
| Зона цилиндра 5 темп. | 235 | °C | |
| Температура адаптера | 235 | °C | |
| Температура расплава | < 260 | °C | |
| Температура матрицы | 235 | °C |
| Инструкции по экструзии |
|---|
| Processing conditions shown are for coextrusion with EVOH.Processing conditions for coextrusion with nylon:Zone 1: 160°CZone 2: 185°CZone 3: 235°CZone 4: 260°CZone 5: 260°CAdapter: 260°CDie: 260°C |
| Тип материала | Категория | Производитель |
|---|---|---|
| SABIC® HDPE B6246LS | HDPE | Saudi Basic Industries Corporation (SABIC) |
| MTEGRITY™ HDPE HD360 | HDPE | M. Holland Company |
| NEFTEKHIM PE 6948C (486H3) | HDPE | Nizhnekamskneftekhim Inc. |
| AXELERON™ CS O-3364 NT CPD | HDPE | The Dow Chemical Company |
| EGYPTENE HD 5740 UA | HDPE | Sidpec (Sidi Kerir Petrochemicals Co.) |
| ICORENE® 5704 | HDPE | ICO Polymers EMEA, A Division of A. Schulman |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved