- Главная страница
- Поиск продуктов
- HDPE
- CONTINUUM™ DGDC-2480 BK
CONTINUUM™ DGDC-2480 BK
| Категория | HDPE, Bimodal Polyethylene Resin |
| Производитель | The Dow Chemical Company |
| Торговая марка | CONTINUUM™ |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
G4zHSb_CONTINUUM-DGDC-2480-BK.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
CONTINUUM™ DGDC-2480 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines.
Industrial Standards Compliance:
NOTES:
(1) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092).
Industrial Standards Compliance:
- ASTM D 3350: cell classification
- Black - PE445574C (See NOTES 1)
- Plastics Pipe Institute (PPI): TR-4
- Black Pipe - CONTINUUM™ DGDC-2480 BK Bimodal Polyethylene Resin (See NOTES 1)
- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F
- NSF International: Standard 14 and 61
- Black Pipe - DGDC-2480 BK (See NOTES 1)
NOTES:
(1) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092).
| Главная Информация | |
|---|---|
| Добавка |
|
| Рейтинг агентства |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельный вес | ASTM D792 | ||
| Natural | 0.949 | g/cm³ | |
| Black 1 | 0.959 | g/cm³ | |
| Массовый расход расплава (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.080 | g/10 min | |
| 190°C/21.6 kg | 8.5 | g/10 min |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Прочность на растяжение 2(Yield) | > 24.1 | MPa | ASTM D638 |
| Удлинение при растяжении 3(Break) | > 500 | % | ASTM D638 |
| Флекторный модуль | 1030 | MPa | ASTM D790B |
| Устойчивость к быстрому размножению трещин, ПК 4 | |||
| Calculated, Full Scale : 0°C | > 46.0 | bar | ISO 13478 |
| S-4 : 0°C | > 12.0 | bar | ISO 13477 |
| Устойчивость к быстрому размножению трещин, Tc- S-4 @ 10 бар 5 | < -17 | °C | ISO 13477 |
| Медленная трещина роста 6 | > 5000 | hr | ASTM F1473 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Термическая стабильность | > 220 | °C | ASTM D3350 |
| Воздействие | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Зубчатый изод Impact 7(23°C) | 490 | J/m | ASTM D256A |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Температура ломкости 8 | < -75.0 | °C | ASTM D746A |
| Примечание | |
|---|---|
| 1 . | Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%). |
| 2 . | Compression molded parts prepared according to ASTM D 4703 Procedure C unless otherwise noted in the test method. Properties will vary with changes in molding conditions and aging time. |
| 3 . | Compression molded parts prepared according to ASTM D 4703 Procedure C unless otherwise noted in the test method. Properties will vary with changes in molding conditions and aging time. |
| 4 . | Pipe diameter of 10 inch IPS (25.4 cm) and Standard Diameter Dimension Ratio (SDR) 11. |
| 5 . | Pipe diameter of 10 inch IPS (25.4 cm) and Standard Diameter Dimension Ratio (SDR) 11. |
| 6 . | Compression molded parts prepared according to ASTM D 4703 Procedure C unless otherwise noted in the test method. Properties will vary with changes in molding conditions and aging time. |
| 7 . | Compression molded parts prepared according to ASTM D 4703 Procedure C unless otherwise noted in the test method. Properties will vary with changes in molding conditions and aging time. |
| 8 . | Compression molded parts prepared according to ASTM D 4703 Procedure C unless otherwise noted in the test method. Properties will vary with changes in molding conditions and aging time. |
| Тип материала | Категория | Производитель |
|---|---|---|
| Unilex™ UP.4400.952 | HDPE | United Polychem |
| CERTENE™ HHP-849 | HDPE | Muehlstein |
| Daelim Po1y® LH-144 | HDPE | DAELIM INDUSTRIAL CO., LTD. |
| Hanwha Total PE R908U | HDPE | HANWHA TOTAL PETROCHEMICALS Co., Ltd. |
| Hostalen ACP 7740 F1 | HDPE | LyondellBasell Industries |
| Lutene® H ME2500 | HDPE | LG Chem Ltd. |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved