Monprene® RG-29068 NAT (PRELIMINARY DATA)
Описание материалов:
Monprene RG-29068 NAT is specifically designed for regulated applications including food contact and is suitable for extrusion. Monprene RG-29068 NAT complies with various US FDA and European regulations and directives for food contact. Please contact Teknor Apex for a regulatory compliance letter.
| Главная Информация | |
|---|
| Характеристики | - Низкая плотность
- Хорошие сенсорные характеристики
- Соответствие пищевого контакта
- Средняя твердость
|
| Используется | - Пищевая упаковка
- Контейнер для еды
- Применение потребительских товаров
|
| Рейтинг агентства | - ЕС неуказанный рейтинг
- FDA пищевой контакт, не Номинальный
|
| Соответствие RoHS | |
| Внешний вид | |
| Формы | |
| Метод обработки | |
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Удельный вес | 0.898 | g/cm³ | ISO 1183 |
| Массовый расход расплава (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Твердость | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Твердость дюрометра | | | ISO 868 |
| Shaw A, 1 sec | 70 | | ISO 868 |
| Shaw A, 5 seconds | 68 | | ISO 868 |
| Эластомеры | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Tensile Stress (100% Strain) | 3.07 | MPa | ISO 37 |
| Tensile Stress (Break) | 10.5 | MPa | ISO 37 |
| Удлинение при растяжении (Break) | 750 | % | ISO 37 |
| Юридическое заявление |
|---|
| The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries. |
| Экструзия | Номинальное значение | Единица измерения | |
|---|
| Зона цилиндра 1 темп. | 149 - 160 | °C | |
| Зона цилиндра 2 температура. | 160 - 193 | °C | |
| Зона цилиндра 3 темп. | 171 - 204 | °C | |
| Зона цилиндра 4 темп. | 182 - 204 | °C | |
| Температура матрицы | 182 - 204 | °C | |
| Инструкции по экструзии |
|---|
| Screw Speed: 30 to 100 rpmDrying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150F (65C). |
