- Главная страница
- Поиск продуктов
- SI
- VECTOR® 4186A
VECTOR® 4186A
| Категория | SI, Styrene Isoprene Branched Copolymer |
| Производитель | Dexco Polymers LP |
| Торговая марка | VECTOR® |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
EdvWzA_VECTOR-4186A.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
VECTOR 4186A
Styrene-Isoprene (SI)n Block Copolymer
VECTOR 4186A styrene-isoprene radial copolymer is produced via proprietary anionic polymerization technology from Dexco Polymers LP, a Dow/ExxonMobil Venture. It is not formulated with the antioxidant TNPP (tris(nonylphenyl) phosphite).
It is made with a patented coupling process that yields a polymer primarily with a 4-arm radial architecture. It is particularly suited for low-viscosity hot melt pressure sensitive adhesive systems having excellent adhesion to low energy surfaces, low migration characteristics, and enhanced die-cutting characteristics within label stock applications.
Styrene-Isoprene (SI)n Block Copolymer
- Radial (SI)n(1) block copolymer.
- High molecular weight copolymer.
- Contains ~73% SI diblock copolymer.
- Supplied as a dense pellet, dusted with talc.
- VECTOR styrenic block copolymers find use under certain regulations as articles or as ingredients in articles intended for food contact or medical applications. Please contact your Dexco Polymers agent for a detailed letter of certification or further information.
VECTOR 4186A styrene-isoprene radial copolymer is produced via proprietary anionic polymerization technology from Dexco Polymers LP, a Dow/ExxonMobil Venture. It is not formulated with the antioxidant TNPP (tris(nonylphenyl) phosphite).
It is made with a patented coupling process that yields a polymer primarily with a 4-arm radial architecture. It is particularly suited for low-viscosity hot melt pressure sensitive adhesive systems having excellent adhesion to low energy surfaces, low migration characteristics, and enhanced die-cutting characteristics within label stock applications.
| Главная Информация | |
|---|---|
| Характеристики |
|
| Используется |
|
| Формы |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельный вес | 0.928 | g/cm³ | ASTM D792 |
| Массовый расход расплава (MFR) (200°C/5.0 kg) | 2.3 | g/10 min | ASTM D1238 |
| Содержание золы | 0.6 | wt% | ASTM D1416 |
| Содержание Стирола | 18.0 | wt% | Internal Method |
| Дополнительная информация | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Содержимое блока | 73.0 | wt% | Internal Method |
| Испарители | 0.3 | wt% | Internal Method |
| Твердость | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Твердость дюрометра (Shore A, 1 sec) | 46 | ASTM D2240 |
| Эластомеры | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Растяжимое напряжение- Поток 1(300% Strain) | 0.689 | MPa | ASTM D412 |
| Прочность на растяжение- Поток 2(Yield) | 2.76 | MPa | ASTM D412 |
| Растяжимое удлинение- Поток 3(Break) | 1500 | % | ASTM D412 |
| Примечание | |
|---|---|
| 1 . | Tested on roll milled/compression molded plaques (0.035" thick). Tested in the machine direction. |
| 2 . | Tested on roll milled/compression molded plaques (0.035" thick). Tested in the machine direction. |
| 3 . | Tested on roll milled/compression molded plaques (0.035" thick). Tested in the machine direction. |
| Тип материала | Категория | Производитель |
|---|---|---|
| VECTOR® 4186A | SI | Dexco Polymers LP |
| VECTOR® 4230 | SI | Dexco Polymers LP |
| VECTOR® 4293A | SI | Dexco Polymers LP |
| VECTOR® 4187A | SI | TSRC Corporation |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved