AXELERON™ CX A-0012 NT CPD

Категория	LDPE, Nucleating Agent Masterbatch
Производитель	The Dow Chemical Company
Торговая марка	AXELERON™
Порт	Китай Шанхайский порт
Торговые условия	FOB, CFR, CIF
Платежное средство	L/C, T/T, Western Union
PDF	8dGpEk_AXELERON-CX-A-0012-NT-CPD.pdf
Контактная информация	EMAIL US  sales@su-jiao.com Служба поддержки клиентов Вичат

Описание материалов:

Dow AXELERON™CX A- 0012 NT is a masterbatch, which is used as a nucleating agent in gas injection processing. It is specially developed for easy mixing with DGDA-6944 NT or DGDB-6944 NT HDPE and DFDA-1253 NT LDPE. If used properly, the product will form a small, evenly distributed cell structure. The masterbatch is based on high-pressure LDPE resin and is added with a 10% heating chemical foaming agent. The use of this product should be 0.1% to 0.3% nucleating agent content, or 1-3% masterbatch content. Typical applications include CATV lead-in cables, models 59, 6, 7 and 11.

Главная Информация
Используется	Изоляция коаксиального кабеля Применение проводов и кабелей Главная партия Пена
Формы	Частицы
Метод обработки	Экструзия

Физический	Номинальное значение	Единица измерения	Метод испытания
Удельный вес	0.970	g/cm³	ASTM D792
Массовый расход расплава (MFR) ¹(190°C/2.16 kg)	2.0	g/10 min	ASTM D1238

Инструкции по экструзии
AXELERON™ CX A-0012 NT CPD is designed to be extruded with Dow's gas injection compounds AXELERON™ CX 6944 NT CPD HDPE and AXELERON™ CX 1253 NT CPD LDPE. It is normally added at 1-3% masterbatch concentration into a blend of 60-80% 6944 and 20-40% 1253.While the exact temperature profile required will depend upon the screw design and construction being made, the following extrusion temperature profile represents a good starting point: Feed Zone: 285-300°F (140-150°C) Transition Zone: 340-355°F (170-180°C) Gas Injection Point: 340-375°F (170-190°C) Metering Zone: 285-340°F (140-170°C); depends on diameter insulation Crosshead and Die: 265-320°F (130-160°C); depends on diameter insulation

Инструкции по экструзии

AXELERON™ CX A-0012 NT CPD is designed to be extruded with Dow's gas injection compounds AXELERON™ CX 6944 NT CPD HDPE and AXELERON™ CX 1253 NT CPD LDPE. It is normally added at 1-3% masterbatch concentration into a blend of 60-80% 6944 and 20-40% 1253.While the exact temperature profile required will depend upon the screw design and construction being made, the following extrusion temperature profile represents a good starting point: Feed Zone: 285-300°F (140-150°C) Transition Zone: 340-355°F (170-180°C) Gas Injection Point: 340-375°F (170-190°C) Metering Zone: 285-340°F (140-170°C); depends on diameter insulation Crosshead and Die: 265-320°F (130-160°C); depends on diameter insulation

Примечание
1 .	Base Resin

Тип материала	Категория	Производитель
Riblene® FL 23	LDPE	Versalis S.p.A.
Kemcor LD 4202	LDPE	Qenos Pty Ltd
PETLIN LD C150Y	LDPE	PETLIN (MALAYSIA) SDN BHD
Pharmalene® FL 20 PH	LDPE	Versalis S.p.A.
TRUCOAT® EC4062AA	LDPE	Westlake Chemical Corporation
SABIC® LDPE PCG00	LDPE	Saudi Basic Industries Corporation (SABIC)

Получите информацию об этом продукте следующим способом.

Телефон	+086 13424755533
EMAIL US	sales@su-jiao.com
Служба поддержки клиентов Вичат

