- Главная страница
- Поиск продуктов
- MDPE
- CONTINUUM™ DGDA-2420 YL
CONTINUUM™ DGDA-2420 YL
| Категория | MDPE, Bimodal Polyethylene Resin |
| Производитель | The Dow Chemical Company |
| Торговая марка | CONTINUUM™ |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
7hitko_CONTINUUM-DGDA-2420-YL.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
CONTINUUM™ DGDA-2420 YL Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product is formulated with UV stabilizers for outdoor storage. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes.
Industrial Standards Compliance:
Industrial Standards Compliance:
- ASTM D 3350: cell classification PE234373E(a)
- Plastics Pipe Institute (PPI):
- ISO PE 80 pipe grade
- ASTM PE 2708 pipe grade - 1250 psi HDB @ 73°F, 800 psi HDS at 73°F, and 1000 psi HDB at 140°F
| Главная Информация | |
|---|---|
| Добавка |
|
| Рейтинг агентства |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Плотность | ASTM D1505 | ||
| Base Resin 1 | 0.940 | g/cm³ | |
| Yellow 2 | 0.944 | g/cm³ | |
| Массовый расход расплава (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | > 0.28 | g/10 min | |
| 190°C/21.6 kg | 9.5 | g/10 min |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Прочность на растяжение 3(Yield) | > 17.9 | MPa | ASTM D638 |
| Удлинение при растяжении 4(Break) | > 600 | % | ASTM D638 |
| Флекторный модуль- 2% Secant | > 621 | MPa | ASTM D790B |
| Устойчивость к быстрому размножению трещин, ПК | |||
| Calculated, Full Scale : 0°C 5 | > 38.6 | bar | ISO 13478 |
| S-4 : 0°C 6 | > 10.0 | bar | ISO 13477 |
| Устойчивость к быстрому размножению трещин, Tc- S-4 @ 5 бар 7 | < -2 | °C | ISO 13477 |
| Медленное сопротивление роста трещин 8 | |||
| Notched Pipe Test : 80°C | > 3000 | hr | ISO 13479 |
| PENT | > 15000 | hr | ASTM F1473 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Термическая стабильность | > 220 | °C | ASTM D3350 |
| Температура ломкости 9 | < -75.0 | °C | ASTM D746A |
| Примечание | |
|---|---|
| 1 . | Compression molded parts prepared according to ASTM D 1928 Procedure C. Properties will vary with changes in molding conditions and aging time. |
| 2 . | Method I (3 point load) |
| 3 . | Compression molded parts prepared according to ASTM D 1928 Procedure C. Properties will vary with changes in molding conditions and aging time.Calculated value, determined by the equation in ISO 4437 based on S-4 test data. Pipe diameter of 12 inch IPS (30.5 mcm) and Standard Dimension Ratio (SDR) 11.5. |
| 4 . | Compression molded parts prepared according to ASTM D 1928 Procedure C. Properties will vary with changes in molding conditions and aging time.Calculated value, determined by the equation in ISO 4437 based on S-4 test data. Pipe diameter of 12 inch IPS (30.5 mcm) and Standard Dimension Ratio (SDR) 11.5. |
| 5 . | Calculated value, determined by the equation in ISO 4437 based on S-4 test data. Pipe diameter of 12 inch IPS (30.5 mcm) and Standard Dimension Ratio (SDR) 11.5. |
| 6 . | Pipe diameter of 12 inch IPS (30.5 cm) and Standard Dimension Ratio (SDR) 11.5. |
| 7 . | Pipe diameter of 12 inch IPS (30.5 cm) and Standard Dimension Ratio (SDR) 11.5. |
| 8 . | Compression molded parts prepared according to ASTM D 1928 Procedure C. Properties will vary with changes in molding conditions and aging time. |
| 9 . | Compression molded parts prepared according to ASTM D 1928 Procedure C. Properties will vary with changes in molding conditions and aging time. |
| Тип материала | Категория | Производитель |
|---|---|---|
| Ravalene CR M 4544 | MDPE | Ravago Group |
| Eleme HPG00340 | MDPE | Eleme Petrochemical Company Ltd |
| Kemcor MD 0898 | MDPE | Qenos Pty Ltd |
| Lupolen 4021 K RM | MDPE | LyondellBasell Industries |
| ICORENE® N2308 | MDPE | A. Schulman Europe |
| KMI PE KM-A632sPF | MDPE | KMI Group, Inc. |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved