- Главная страница
- Поиск продуктов
- LLDPE
- DOWLEX™ NG 5056.01G
DOWLEX™ NG 5056.01G
| Категория | LLDPE, Polyethylene Resin |
| Производитель | The Dow Chemical Company |
| Торговая марка | DOWLEX™ |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
5oolNb_DOWLEX-NG-5056-01G.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
DOWLEX™NG 5056.01G polyethylene resin polyethylene resin is a new generation of linear low density polyethylene resin, used for high-quality blown film processing, the processing requires a combination of excellent optical properties, tear strength and heat sealing, and very good toughness/stiffness between the balance. DOWLEX NG5056.01G polyethylene resin has a very low crystal point level, making it very suitable for composite films and other special packaging. This resin contains slip agent and opening agent.
Note: When applied to the application field of contact food, DOWLEX NG 5056.01G polyethylene resin should comply with the U.S. Food and Drug Administration when it is unmodified and the processing process follows the requirements of good manufacturing practices. The requirements of the 177.1520 regulations and the requirements of the food contact regulations of most European countries. Please contact your nearest Dow representative for proof of compliance with the Food Contact Act. The purchaser remains responsible for determining whether the use of its products complies with all relevant regulations.
Application field:
Note: When applied to the application field of contact food, DOWLEX NG 5056.01G polyethylene resin should comply with the U.S. Food and Drug Administration when it is unmodified and the processing process follows the requirements of good manufacturing practices. The requirements of the 177.1520 regulations and the requirements of the food contact regulations of most European countries. Please contact your nearest Dow representative for proof of compliance with the Food Contact Act. The purchaser remains responsible for determining whether the use of its products complies with all relevant regulations.
Application field:
- high transparency paper towel outer package
- fresh food bag
- food packaging film
- composite film
| Главная Информация | |
|---|---|
| Добавка |
|
| Рейтинг агентства |
|
| Формы |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельный вес 1 | 0.921 | g/cm³ | ASTM D792 |
| Массовый расход расплава (MFR) 2(190°C/2.16 kg) | 1.1 | g/10 min | ISO 1133 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Коэффициент трения 3(vs. Itself - Dynamic) | 0.24 | ASTM D1894 |
| Пленки | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Толщина пленки протестирована | 50 | µm | |
| Энергия прокола пленки 4(50 µm) | 3.50 | J | ASTM D5748 |
| Сила прокола пленки 5(50 µm) | 54.0 | N | ASTM D5748 |
| Модуль растяжения 6 | ISO 527-3 | ||
| 2% secant, MD : 50 µm | 198 | MPa | ISO 527-3 |
| 2% secant, TD : 50 µm | 238 | MPa | ISO 527-3 |
| Tensile Stress 7 | ISO 527-3 | ||
| MD : Yield, 50 µm | 7.50 | MPa | ISO 527-3 |
| TD : Yield, 50 µm | 8.00 | MPa | ISO 527-3 |
| MD : Break, 50 µm | 38.0 | MPa | ISO 527-3 |
| TD : Break, 50 µm | 37.0 | MPa | ISO 527-3 |
| Удлинение при растяжении 8 | ISO 527-3 | ||
| MD : Break, 50 µm | 810 | % | ISO 527-3 |
| TD : Break, 50 µm | 920 | % | ISO 527-3 |
| Ударное падение Dart 9(50 µm) | 450 | g | ISO 7765-1/A |
| Elmendorf Tear Strength 10 | ASTM D1922 | ||
| MD : 50 µm | 890 | g | ASTM D1922 |
| TD : 50 µm | 1100 | g | ASTM D1922 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Викат Температура размягчения 11 | 104 | °C | ASTM D1525 |
| Оптический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Блеск 12(45°, 50.0 µm) | 61 | ASTM D2457 | |
| Haze 13(50.0 µm) | 8.9 | % | ISO 14782 |
| Экструзия | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Температура расплава | 190 - 240 | °C |
| Инструкции по экструзии |
|---|
| 管形薄膜挤出的制造条件： 熔体温度：190 至 240°C。 放大比范围：1.5 至 3:1。 建议的厚度范围：10 至 150 µm。 |
| Примечание | |
|---|---|
| 1 . | Compression molding |
| 2 . | Compression molding |
| 3 . | Blow molded film extruded at 235°C, 50 microns, 2.5 BUR, 1.5mm die gap. |
| 4 . | Blow molded film extruded at 235°C, 50 microns, 2.5 BUR, 1.5mm die gap. |
| 5 . | Blow molded film extruded at 235°C, 50 microns, 2.5 BUR, 1.5mm die gap. |
| 6 . | Blow molded film extruded at 235°C, 50 microns, 2.5 BUR, 1.5mm die gap. |
| 7 . | Blow molded film extruded at 235°C, 50 microns, 2.5 BUR, 1.5mm die gap. |
| 8 . | Blow molded film extruded at 235°C, 50 microns, 2.5 BUR, 1.5mm die gap. |
| 9 . | Blow molded film extruded at 235°C, 50 microns, 2.5 BUR, 1.5mm die gap. |
| 10 . | Blow molded film extruded at 235°C, 50 microns, 2.5 BUR, 1.5mm die gap. |
| 11 . | Compression molding |
| 12 . | Blow molded film extruded at 235°C, 50 microns, 2.5 BUR, 1.5mm die gap. |
| 13 . | Blow molded film extruded at 235°C, 50 microns, 2.5 BUR, 1.5mm die gap. |
| Тип материала | Категория | Производитель |
|---|---|---|
| SureSpec LLC4-200G | LLDPE | Genesis Polymers |
| YUCLAIR® FU149M | LLDPE | SK Global Chemical |
| CERTENE™ LLBF-122F | LLDPE | Muehlstein |
| DOWLEX™ 2645.11S | LLDPE | The Dow Chemical Company |
| Halene L 71601W | LLDPE | Haldia Petrochemicals Ltd. |
| KPOL-LLDPE LLD K-21/927 | LLDPE | KPOL Chem Co. |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved