- Главная страница
- Поиск продуктов
- FKM
- Viton® B-202
Viton® B-202
| Категория | FKM, Fluoroelastomer , Fluorelastomer |
| Производитель | DuPont Performance Elastomers |
| Торговая марка | Viton® |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
vbfgbW_Viton-B-202.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
Viton® B-202* is a low viscosity, B-type gum polymer that demonstrates improved processing and rheology when compared with existing fluoroelastomers.
Viton B-202 is designed to be cured with either Viton Curative #30 or Viton Curative #50. When using Viton Curative #30, use Viton Curative #20 in a ratio of about 1.8 Viton Curative #30 to Viton Curative #20. When using Viton Curative #50, use 0.3-0.5 phr of Viton Curative #20 to ensure a fast cure rate. Note that Viton Curative #20 can be difficult to mix into low viscosity stocks, such as those based on Viton B-202, and careful attention needs to be paid to mixing procedures.
Compared with other B-family terpolymers, Viton B-202 provides:
-Low viscosity
-Improved processing
-Increased mold flow
-Excellent mold release
Applications
-Transfer and injection molding of complex shapes
-Extrusions (e.g., fuel hose and tubing)
-Solution coatings of fabrics, tanks or chemical containers
Viton B-202 can be blended with other Viton types to modify viscosity, enhance processibility and/or improve flow.
Viton B-202 is designed to be cured with either Viton Curative #30 or Viton Curative #50. When using Viton Curative #30, use Viton Curative #20 in a ratio of about 1.8 Viton Curative #30 to Viton Curative #20. When using Viton Curative #50, use 0.3-0.5 phr of Viton Curative #20 to ensure a fast cure rate. Note that Viton Curative #20 can be difficult to mix into low viscosity stocks, such as those based on Viton B-202, and careful attention needs to be paid to mixing procedures.
Compared with other B-family terpolymers, Viton B-202 provides:
-Low viscosity
-Improved processing
-Increased mold flow
-Excellent mold release
Applications
-Transfer and injection molding of complex shapes
-Extrusions (e.g., fuel hose and tubing)
-Solution coatings of fabrics, tanks or chemical containers
Viton B-202 can be blended with other Viton types to modify viscosity, enhance processibility and/or improve flow.
| Главная Информация | |
|---|---|
| Характеристики |
|
| Используется |
|
| Внешний вид |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельный вес | 1.86 | g/cm³ | ASTM D792 |
| Вязкость Mooney | 20 | MU | ASTM D1646 |
| Твердость | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Твердость дюрометра (Shore A) | 77 | ASTM D2240 |
| Эластомеры | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Tensile Stress (100% Strain) | 3.70 | MPa | ASTM D412 |
| Прочность на растяжение (Break) | 8.70 | MPa | ASTM D412 |
| Удлинение при растяжении (Break) | 310 | % | ASTM D412 |
| Комплект сжатия | |||
| 150°C, 70 hr | 20 | % | ASTM D395B |
| 200°C, 70 hr | 34 | % | ASTM D395 |
| 200°C, 168 hr | 42 | % | ASTM D395B |
| Старение | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Изменение прочности на растяжение в воздухе | ASTM D573 | ||
| 200°C, 168 hr | 55 | % | ASTM D573 |
| 100% strain, 200°C, 168 hr | 57 | % | ASTM D573 |
| 232°C, 24 hr | 52 | % | ASTM D573 |
| 100% strain, 232°C, 24 hr | 38 | % | ASTM D573 |
| 250°C, 168 hr | 29 | % | ASTM D573 |
| 100% strain, 250°C, 168 hr | 24 | % | ASTM D573 |
| Изменение максимального удлинения в воздухе | ASTM D573 | ||
| 200°C, 168 hr | -26 | % | ASTM D573 |
| 232°C, 24 hr | -23 | % | ASTM D573 |
| 250°C, 168 hr | -26 | % | ASTM D573 |
| Изменение твердости дюрометра в воздухе | ASTM D573 | ||
| Support a, 200°C, 168 hr | 3.0 | ASTM D573 | |
| Support a, 232°C, 4 hr | 1.0 | ASTM D573 | |
| Support a, 250°C, 168 hr | -26 2.0 | ASTM D573 | |
| Изменение прочности на растяжение | ASTM D471 | ||
| 150°C, 168 hr, in ASTM 105 oil | -23 | % | ASTM D471 |
| 100% strain, 150°C, 168 hr, in ASTM 105 oil | 49 | % | ASTM D471 |
| 200°C, 70 hr, in Stauffer 7700 liquid | 30 | % | ASTM D471 |
| 100% strain, 200°C, 70 hr, in Stauffer 7700 liquid | 24 | % | ASTM D471 |
| Изменение максимального удлинения | ASTM D471 | ||
| 150°C, 168 hr, in ASTM 105 oil | -56 | % | ASTM D471 |
| 200°C, 70 hr, in Stauffer 7700 liquid | -19 | % | ASTM D471 |
| Изменение твердости дюрометра | ASTM D471 | ||
| Support A, 150°C, 168 hr, in ASTM 105 oil | 5.0 | ASTM D471 | |
| Support A, 200°C, 70 hr, in Stauffer 7700 liquid | -8.0 | ASTM D471 | |
| Изменение объема | ASTM D471 | ||
| 23°C, 70 hr, Class C Standard Fuel | 3.0 | % | ASTM D471 |
| 23°C, 70 hr, methanol | 17 | % | ASTM D471 |
| 150°C, 70 hr, in ASTM 105 oil | -1.0 | % | ASTM D471 |
| 200°C, 70 hr, in Stauffer 7700 liquid | 9.0 | % | ASTM D471 |
| Дополнительная информация |
|---|
| Nominal Viscosity, ML 1 + 10, 121°C: 25Polymer Fluorine Content: 68.5% |
| Тип материала | Категория | Производитель |
|---|---|---|
| DAI-EL™ G-802 | Fluorelastomer | DAIKIN AMERICA, INC. |
| DAI-EL™ G-501NK | Fluorelastomer | DAIKIN AMERICA, INC. |
| Boda BDF631P | Fluorelastomer | Chenguang Fluoro & Silicone Elastomers Co., Ltd. |
| Boda BDF-H2701 | Fluorelastomer | Chenguang Fluoro & Silicone Elastomers Co., Ltd. |
| DAI-EL™ G-7320BP | Fluorelastomer | DAIKIN AMERICA, INC. |
| Jiangsu Meilan XXMLF2-13W | Fluorelastomer | Jiangsu Meilan Chemical Co., Ltd. |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved