- Главная страница
- Поиск продуктов
- PMMA
- ACRYLITE® Film 0F063
ACRYLITE® Film 0F063
| Категория | PMMA, PMMA Film , Film, PMMA |
| Производитель | Evonik Cyro LLC |
| Торговая марка | ACRYLITE® Film |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
vD9BDu_ACRYLITE-Film-0F063.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
ACRYLITE® Film 0F063 is a very high weather resistant and transparent acrylic film for graphic printings and lamination systems.
Due to its excellent performance under weathering and UV light exposure, ACRYLITE® Film 0F063 does not present color change or yellowing. Therefore it provides high protection of polymeric substrates from degradation caused by UV radiation.
Its very smooth surface leads the film to have a good optical quality surface.
Application
ACRYLITE® Film 0F063 is suitable as top layer for high UV and weathering protection of different polymeric substrates including ones based on Fiber Reinforced Polyester Resin.
ACRYLITE® Film 0F063 can be used to be printed on as good quality film decoration and then laminated on different polymeric films or sheets. Laminated decoration films based on ACRYLITE® are suitable for a wide range of molding processes such as thermoforming and insert molding.
Due to its excellent performance under weathering and UV light exposure, ACRYLITE® Film 0F063 does not present color change or yellowing. Therefore it provides high protection of polymeric substrates from degradation caused by UV radiation.
Its very smooth surface leads the film to have a good optical quality surface.
Application
ACRYLITE® Film 0F063 is suitable as top layer for high UV and weathering protection of different polymeric substrates including ones based on Fiber Reinforced Polyester Resin.
ACRYLITE® Film 0F063 can be used to be printed on as good quality film decoration and then laminated on different polymeric films or sheets. Laminated decoration films based on ACRYLITE® are suitable for a wide range of molding processes such as thermoforming and insert molding.
| Главная Информация | |
|---|---|
| Характеристики |
|
| Используется |
|
| Внешний вид |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельный вес | 1.17 | g/cm³ | DIN 53479 |
| Поверхностное натяжение | 50 | mN/m | DIN 53364 |
| Оптический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| UV Transmittance - 280 - 380 nm | < 1.0 | % | DIN EN 410 |
| Дополнительная информация | Номинальное значение | Метод испытания | |
|---|---|---|---|
| Ускоренная устойчивость к атмосферным воздействиям- Метод A, цикл 1, 65% RH 1 | No Visible Change | ISO 4892-2 |
| Пленки | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Tensile Stress (Yield) | 62.0 | MPa | ISO 527-3 |
| Удлинение при растяжении | ISO 527-3 | ||
| Yield | 7.0 | % | |
| Break | 21 | % |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Температура перехода стекла | 114 | °C | ISO 11357-2 |
| Оптический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Индекс преломления | 1.490 | ISO 489 | |
| Коэффициент пропускания 2 | 92.0 | % | ISO 13468-2 |
| Примечание | |
|---|---|
| 1 . | 8,000 hr |
| 2 . | D65 |
| Тип материала | Категория | Производитель |
|---|---|---|
| DELPET™ LP-1 | Acrylic (PMMA) | Asahi Kasei Chemicals Corporation |
| Diakon® CMG334V | Acrylic (PMMA) | Lucite International Inc. |
| Diakon® CLH952 | Acrylic (PMMA) | Lucite International Inc. |
| LNP™ STAT-LOY™ 93000LTH compound | Acrylic, Unspecified | SABIC Innovative Plastics |
| PARAPET GR04940 | Acrylic (PMMA) | Kuraray Co., Ltd. |
| Altuglas® BS 684 | Acrylic (PMMA) | Altuglas International of Arkema Inc. |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved