DuraSurf™ ETA

Crown Plastics standard line of Easy-To-Apply wear strips and adhesive backed tapes. Each tape product offers excellent abrasion resistance, low coefficient of friction, high impact strength and high performance properties people have come to expect from UHMW. By providing this exceptional material with an adhesive backing, installation time and costs are significantly reduced. No need for bolts or fasteners, no need to countersink. As a matter of fact, DuraSurf™ ETA also reduces scrap by 75%. When a standard 1/4" thick sheet of UHMW is installed using the traditional mechanical fastening method, 3/16" of the material is lost to the bolt head. This leaves only a 1/16" usable wear surface. You can achieve the same result with a 1/16" DuraSurf™ ETA tape product and eliminate 80% of the time and cost associated with traditional installation methods. Crown Plastics offers a wide range of both rubber and acrylic based adhesive systems to meet virtually any application requirement.

AVAILABLE THICKNESS
.005" (.125 mm), .010" (.25 mm), .015"(.38 mm), .020" (.5 mm), .031" (.75 mm), .040" (1 mm),
.050" (1.3 mm), .062" (1.57 mm), .080" (2 mm) .093" (2.35 mm), 100" (2.5 mm), .125" (3.17 mm)

AVAILABLE WIDTHS
All dimensions between 1/4" (6.35 mm) and 24" (610 mm)

UHMW PROPERTIES

• Excellent abrasion and wear resistance

• Very high impact strength

• Meets FDA and USDA guidelines

• No moisture absorption

• Self-lubricating - no need for oils or lubricants

• Excellent noise abatement properties

• Chemical resistance and corrosion resistant

• Maintains performance and properties at -30°C

• Meets ASTM-D-4020-81

• Low coefficient of friction