- Главная страница
- Поиск продуктов
- LLDPE
- Formolene FORMAX® L91507H
Formolene FORMAX® L91507H
| Категория | LLDPE, Linear Low Density Polyethylene |
| Производитель | Formosa Plastics Corporation, U.S.A. |
| Торговая марка | Formolene FORMAX® |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
uG4TAh_Formolene-FORMAX-L91507H.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
Formolene FORMAX® L9 is a superior strength linear low density hexene copolymer polyethylene made using a gas-phase process. Film mechanical properties are comparable to premium strength LLDPE film resins.
Formolene FORMAX® L9 is formulated with slip and antiblock for use in high performance film applications offering excellent extrusion processing and outstanding impact strength and tear resistance. Films exhibit good optical properties.
Formolene FORMAX® L9 meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.
Suggested Applications:
Formolene FORMAX® L9 is formulated with slip and antiblock for use in high performance film applications offering excellent extrusion processing and outstanding impact strength and tear resistance. Films exhibit good optical properties.
Formolene FORMAX® L9 meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.
Suggested Applications:
- Industrial Packaging
- Industrial Liners
- Food Packaging
- Can Liners
- Consumer Trash Bags
- Coextrusion
| Главная Информация | |
|---|---|
| Добавка |
|
| Характеристики |
|
| Используется |
|
| Рейтинг агентства |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Плотность | 0.915 | g/cm³ | ASTM D1505 |
| Массовый расход расплава (MFR) (190°C/2.16 kg) | 0.70 | g/10 min | ASTM D1238 |
| Пленки | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Толщина пленки протестирована | 25 | µm | |
| Прочность на растяжение | ASTM D882 | ||
| MD : Yield, 25 µm, Blown Film | 10.5 | MPa | |
| TD : Yield, 25 µm, Blown Film | 10.5 | MPa | |
| MD : Break, 25 µm, Blown Film | 39.3 | MPa | |
| TD : Break, 25 µm, Blown Film | 34.5 | MPa | |
| Удлинение при растяжении | ASTM D882 | ||
| MD : Break, 25 µm, Blown Film | 670 | % | |
| TD : Break, 25 µm, Blown Film | 880 | % | |
| Ударное падение Dart (25 µm, Blown Film) | 540 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm, Blown Film | 470 | g | |
| TD : 25 µm, Blown Film | 650 | g | |
| Температура инициализации уплотнения 1(51 µm) | 103 | °C |
| Примечание | |
|---|---|
| 1 . | Temperature at which 2 lb/in heat seal strengh is achieved. Lako Tool SL-10 Heat Seal/Hot Tack Tester, 0.5 sec dwell, 40 psi bar pressure, peel speed 10 in./min. |
| Тип материала | Категория | Производитель |
|---|---|---|
| MarFlex® 7120B | LLDPE | Chevron Phillips Chemical Company LLC |
| MarFlex® 7308DK | LLDPE | Chevron Phillips Chemical Company LLC |
| Premier LB02019 - B | LLDPE | Premier Polymers, LLC. |
| SEETEC LLDPE UF313 | LLDPE | Lotte Chemical Corporation |
| Flexirene® FG 23 U | LLDPE | Versalis S.p.A. |
| MARPOL® LL4F 801-SB | LLDPE | Marco Polo International, Inc. |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved