- Главная страница
- Поиск продуктов
- HDPE
- CONTINUUM™ DGDC-2480 NT
CONTINUUM™ DGDC-2480 NT
| Категория | HDPE, Bimodal Polyethylene Resin |
| Производитель | The Dow Chemical Company |
| Торговая марка | CONTINUUM™ |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
sszBtk_CONTINUUM-DGDC-2480-NT.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
CONTINUUM™ DGDC-2480 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines.
Industrial Standards Compliance:
ASTM D 3350: cell classification
NOTES:
(1) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092).
Industrial Standards Compliance:
ASTM D 3350: cell classification
- Natural - PE445574A
- Black - PE445574C (See NOTES 1)
- Natural Pipe - CONTINUUM™ DGDC-2480 NT
- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F
- Black Pipe - CONTINUUM DGDC-2480 BK (See NOTES 1)
- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F
- Natural Pipe - DGDC-2480 NT
- Black Pipe - DGDC-2480 BK (See NOTES 1)
NOTES:
(1) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092).
| Главная Информация | |
|---|---|
| Добавка |
|
| Рейтинг агентства |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельный вес | ASTM D792 | ||
| Natural | 0.949 | g/cm³ | |
| Black 1 | 0.959 | g/cm³ | |
| Массовый расход расплава (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.080 | g/10 min | |
| 190°C/21.6 kg | 8.5 | g/10 min |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Прочность на растяжение 2(Yield) | > 24.1 | MPa | ASTM D638 |
| Удлинение при растяжении 3(Break) | > 500 | % | ASTM D638 |
| Флекторный модуль | 1030 | MPa | ASTM D790B |
| Устойчивость к быстрому размножению трещин, ПК | |||
| Calculated, Full Scale : 0°C 4 | > 46.0 | bar | ISO 13478 |
| S-4 : 0°C 5 | > 12.0 | bar | ISO 13477 |
| Устойчивость к быстрому размножению трещин, Tc- S-4 @ 10 бар 6 | < -17 | °C | ISO 13477 |
| Медленная трещина роста 7 | > 5000 | hr | ASTM F1473 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Термическая стабильность | > 220 | °C | ASTM D3350 |
| Воздействие | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Зубчатый изод Impact 8(23°C) | 490 | J/m | ASTM D256A |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Температура ломкости 9 | < -75.0 | °C | ASTM D746A |
| Примечание | |
|---|---|
| 1 . | Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%). |
| 2 . | Compression molded parts prepared according to ASTM D 4703 Procedure C unless otherwise noted in the test method. Properties will vary with changes in molding conditions and aging time. |
| 3 . | Compression molded parts prepared according to ASTM D 4703 Procedure C unless otherwise noted in the test method. Properties will vary with changes in molding conditions and aging time. |
| 4 . | Calculated value, determined by the equation in ISO 4437 based on S-4 test data. Pipe diameter of 10 inch IPS (25.4 cm) and Standard Diameter Ratio (SDR) 11. |
| 5 . | Pipe diameter of 10 inch IPS (25.4 cm) and Standard Diameter Ratio (SDR) 11. |
| 6 . | Pipe diameter of 10 inch IPS (25.4 cm) and Standard Diameter Ratio (SDR) 11. |
| 7 . | Compression molded parts prepared according to ASTM D 4703 Procedure C unless otherwise noted in the test method. Properties will vary with changes in molding conditions and aging time. |
| 8 . | Compression molded parts prepared according to ASTM D 4703 Procedure C unless otherwise noted in the test method. Properties will vary with changes in molding conditions and aging time. |
| 9 . | Compression molded parts prepared according to ASTM D 4703 Procedure C unless otherwise noted in the test method. Properties will vary with changes in molding conditions and aging time. |
| Тип материала | Категория | Производитель |
|---|---|---|
| Qenos PE HD5148 | HDPE | Qenos Pty Ltd |
| EVALENE® HDPE HB23551 | HDPE | JG Summit Petrochemical Corporation |
| SABIC® HDPE CLARENE 3H673 | HDPE | Saudi Basic Industries Corporation (SABIC) |
| Eleme NGH200IG | HDPE | Eleme Petrochemical Company Ltd |
| MARPOL® HDB 506 | HDPE, MMW | Marco Polo International, Inc. |
| Witcom HDPE AS-S-UV | HDPE | Witcom Engineering Plastics B.V. |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved