- Главная страница
- Поиск продуктов
- PP
- Pinnacle PP 8118H
Pinnacle PP 8118H
| Категория | PP, Polypropylene Copolymer , PP Copolymer |
| Производитель | Pinnacle Polymers |
| Торговая марка | Pinnacle PP |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
qQMX75_Pinnacle-PP-8118H.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
18 MELT FLOW HIGH STIFFNESS COPOLYMER POLYPROPYLENE FOR INJECTION MOLDING
Pinnacle Polymers Polypropylene 8118H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.
This copolymer is intended for use in housewares, consumer products and any application requiring both high stiffness and good impact. Contains nucleator and antistat.
The 8118H product provides:
Pinnacle's polypropylene, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 3.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.
Pinnacle Polymers Polypropylene 8118H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.
This copolymer is intended for use in housewares, consumer products and any application requiring both high stiffness and good impact. Contains nucleator and antistat.
The 8118H product provides:
- High stiffness and good impact strength
- Excellent mold release
- Superior processability
- Excellent lot-to-lot consistency
Pinnacle's polypropylene, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 3.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.
| Главная Информация | |
|---|---|
| Добавка |
|
| Характеристики |
|
| Используется |
|
| Рейтинг агентства |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Плотность | 0.900 | g/cm³ | ASTM D1505 |
| Массовый расход расплава (MFR) (230°C/2.16 kg) | 18 | g/10 min | ASTM D1238 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Прочность на растяжение 1(Yield, 3.20 mm, Injection Molded) | 29.0 | MPa | ASTM D638 |
| Удлинение при растяжении 2(Yield, 3.20 mm, Injection Molded) | 5.0 | % | ASTM D638 |
| Флекторный модуль- 1% Secant 3(3.20 mm, Injection Molded) | 1480 | MPa | ASTM D790A |
| Воздействие | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Зубчатый изод Impact 4(23°C, 3.20 mm, Injection Molded) | 80 | J/m | ASTM D256 |
| Зубчатый изод удара (площадь) 5(23°C, 3.20 mm, Injection Molded) | 7.90 | kJ/m² | ASTM D256 |
| Gardner Impact 6(-30°C) | 4.20 | J | ASTM D5420 |
| Примечание | |
|---|---|
| 1 . | Type I, 51 mm/min |
| 2 . | Type I, 51 mm/min |
| 3 . | Type I, 1.3 mm/min |
| 4 . | Type I |
| 5 . | Type I |
| 6 . | Method G, Geometry GC |
| Тип материала | Категория | Производитель |
|---|---|---|
| Comai 707-2 NT | PP Homopolymer | Comai Ltda |
| REPOL® R019MZ | PP Random Copolymer | Reliance Industries Limited |
| Fiberfil® J-69/40/E | PP Homopolymer | Fiberfil® Engineered Plastics Inc. |
| KMI PP KM-554IB | PP Impact Copolymer | KMI Group, Inc. |
| ALTECH® PP-B ECO 2030/550 GF30 CP | PP Copolymer | ALBIS PLASTIC GmbH |
| Polychim HA10XT | PP Homopolymer | Polychim Industrie S.A.S. |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved