Algoflon® F 5/S

Категория	PTFE, Polytetrafluoroethylene
Производитель	Solvay Specialty Polymers
Торговая марка	Algoflon®
Порт	Китай Шанхайский порт
Торговые условия	FOB, CFR, CIF
Платежное средство	L/C, T/T, Western Union
PDF	pzUhE6_Algoflon-F-5-S.pdf
Контактная информация	EMAIL US  sales@su-jiao.com Служба поддержки клиентов Вичат

Описание материалов:

Algoflon® F 5/S is a fine cut homopolymer PTFE powder that is white, granular and non-free flowing powder. It is designed for compounds production and in particular it is recommended for use with high filler content. This material exhibits high bulk density, tensile strength and elongation at break. Black compounds based on Algoflon® F5/S show optimum isotropic behaviour and therefore excellent longitudinal mechanical properties.

Main features of Algoflon® F 5/S are:

High bulk density

Very good mechanical properties

Excellent blendability

Very good electrical properties

Isotropic properties

Главная Информация
Характеристики	Хорошая химическая стойкость
Используется	Смешивание Добавка
Рейтинг агентства	Управление по санитарному надзору за качеством пищевых продуктов и медикаментов 21 CFR 177,1550
Внешний вид	Белый
Формы	Порошок

Физический	Номинальное значение	Единица измерения	Метод испытания
Удельный вес	2.16		ASTM D792
Средний размер частиц	15	µm	Internal method
Сжатие- Радиальная	3.1	%	ASTM D4894
Плотность объема	410	g/l	ASTM D4894

Механические	Номинальное значение	Единица измерения	Метод испытания
Удлинение при разрыве	400	%
Прочность на растяжение	44.0	MPa	ASTM D4894

Дополнительная информация
Processing Algoflon® F 5/S is used for preparing filled products based on PTFE resins. Prior to use, the powder needs to be conditioned above 19°C/66°F. In order to obtain fully homogeneous compounds, it is necessary to mix Algoflon® F 5/S and filler with high shear systems. Temperature must also be controlled (it should not rise above 40°C/104°F) during the mixing process to avoid agglomeration of PTFE and generation of white spots. Algoflon® F 5/S based compounds are processed using normal compression moulding as similar to virgin fine cut PTFE. Storage and Handling Algoflon® PTFE fine cut powders must be stored and handled carefully to achieve defect free compounds and items. Temperatures that are too high should be avoided to prevent powder lumping and poor flow. Storage and handling facilities should be clean since even very small foreign particles can cause defects in finished products. Keep resin drums closed and clean. Good housekeeping and careful handling are essential. Safety and Toxicology Before using Algoflon® PTFE fine cut powders, consult the product Material Safety Data Sheet and follow all label directions and handling precautions. As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Vapor extractor units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact, wash with soap and water. In case of eye contact, flush with water immediately and seek medical help. Do not smoke in areas contaminated with powder, vapor or fumes. See Material Safety Data Sheet for detailed advice on waste disposal methods. Packaging Algoflon® F 5/S is packaged in 25 kg nonreturnable drums. Each drum has two bag liners made of polyethylene resin. Additional Technical Information For Material Safety Data Sheet or additional technical information consult your Solvay sales representative or the website: www.solvayspecialtypolymers.com

Дополнительная информация

Processing Algoflon® F 5/S is used for preparing filled products based on PTFE resins. Prior to use, the powder needs to be conditioned above 19°C/66°F. In order to obtain fully homogeneous compounds, it is necessary to mix Algoflon® F 5/S and filler with high shear systems. Temperature must also be controlled (it should not rise above 40°C/104°F) during the mixing process to avoid agglomeration of PTFE and generation of white spots. Algoflon® F 5/S based compounds are processed using normal compression moulding as similar to virgin fine cut PTFE. Storage and Handling Algoflon® PTFE fine cut powders must be stored and handled carefully to achieve defect free compounds and items. Temperatures that are too high should be avoided to prevent powder lumping and poor flow. Storage and handling facilities should be clean since even very small foreign particles can cause defects in finished products. Keep resin drums closed and clean. Good housekeeping and careful handling are essential. Safety and Toxicology Before using Algoflon® PTFE fine cut powders, consult the product Material Safety Data Sheet and follow all label directions and handling precautions. As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Vapor extractor units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact, wash with soap and water. In case of eye contact, flush with water immediately and seek medical help. Do not smoke in areas contaminated with powder, vapor or fumes. See Material Safety Data Sheet for detailed advice on waste disposal methods. Packaging Algoflon® F 5/S is packaged in 25 kg nonreturnable drums. Each drum has two bag liners made of polyethylene resin. Additional Technical Information For Material Safety Data Sheet or additional technical information consult your Solvay sales representative or the website: www.solvayspecialtypolymers.com

Тип материала	Категория	Производитель
3M™ Dyneon™ PTFE Compound TF 3311	PTFE	3M Advanced Materials Division
Avalon 87	PTFE	Greene, Tweed & Co.
Fluoroplex X 50 - GML	PTFE	UNIFLON
Flontech® FT-1-1F	PTFE	Guarniflon S.p.A. - Flontech Division
Flontech® FT-905-DL	PTFE	Guarniflon S.p.A. - Flontech Division
Flontech® FT-BRR30-8	PTFE	Guarniflon S.p.A. - Flontech Division

Получите информацию об этом продукте следующим способом.

Телефон	+086 13424755533
EMAIL US	sales@su-jiao.com
Служба поддержки клиентов Вичат

