Vipel® F701-SPT-30

Vipel Corrosion Resistant Isophthalic Polyester Resin

AOC's Vipel F701-S series resins are high molecular weight, two stage isophthalic, unsaturated polyester resins with the wet out, cure and handling characteristics of general purpose resins. The main feature is lower styrene content. They have an excellent shelf life and are ideal for filament winding and spray-up. A few selected resins are listed below.

Corrosion resistance
AOC's Vipel F701-S series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many petroleum products such as kerosene, heating oil and crude oils. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC. Vipel F701-S series resins contain less styrene than standard
versions.

Versatile
Suitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.

Food and Drug
All resins in this datasheet are manufactured from raw materials that are listed in FDA regulation Title 21 CFR 177.2420. It is the fabricator's responsibility to also be sure that the final composite is well cured. All composites used for FDA applications should be post cured at 180°F/82°C for at least 4 hours. After post curing it should be washed with soap and water and then rinsed.