LUVOCOM® 100-8633/BL

Категория	PUR, Polyurethane , PUR, Unspecified
Производитель	LEHVOSS Group
Торговая марка	LUVOCOM®
Порт	Китай Шанхайский порт
Торговые условия	FOB, CFR, CIF
Платежное средство	L/C, T/T, Western Union
PDF	lcctDY_LUVOCOM1008633BL.pdf
Контактная информация	EMAIL US  sales@su-jiao.com Служба поддержки клиентов Вичат

Описание материалов:

LUVOCOM®100-8633/BL is a polyurethane material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific,. LUVOCOM®The main characteristics of 100-8633/BL are: wear resistance.

Typical application areas include:

Tools

container

engineering/industrial accessories

Главная Информация
Характеристики	Хорошая стойкость к истиранию
Используется	Машина/механические детали Форма Контейнер Контейнер для еды Литьевая форма/инструмент
Внешний вид	Синий

Физический	Номинальное значение	Единица измерения	Метод испытания
Плотность	1.64	g/cm³	ISO 1183
Формовочная усадка	0.80 - 1.2	%	DIN 16901
Поглощение воды (23°C, 24 hr)	< 0.30	%

Твердость	Номинальное значение	Единица измерения	Метод испытания
Твердость дюрометра (Shore A)	91		ISO 868

Механические	Номинальное значение	Единица измерения	Метод испытания
Модуль растяжения	50.0	MPa	ISO 527-2
Tensile Stress (Break)	38.0	MPa	ISO 527-2
Растяжимое напряжение (Yield)	500	%	ISO 527-2

Воздействие	Номинальное значение	Метод испытания
Charpy Unnotched Impact Strength		ISO 179/1fU
-30°C	No Break	ISO 179/1fU
23°C	No Break	ISO 179/1fU

Тепловой	Номинальное значение	Единица измерения	Метод испытания
Температура непрерывного использования	90.0	°C	UL 746B
Максимальная рабочая температура- Короткий срок	110	°C

Электрический	Номинальное значение	Единица измерения	Метод испытания
Insulation Resistance	> 1.0E+12	ohms	IEC 60167
Удельное сопротивление поверхности	> 1.0E+12	ohms	IEC 60093

Инъекция	Номинальное значение	Единица измерения
Температура сушки
Dehumidification desiccant, B	100 - 110	°C
Hot air dryer, A	60 - 90	°C
Время сушки
Dehumidification desiccant, B	2.0 - 3.0	hr
Hot air dryer, A	2.0 - 3.0	hr
Задняя температура	190 - 230	°C
Средняя температура	190 - 230	°C
Передняя температура	190 - 230	°C
Температура сопла	200 - 240	°C
Температура обработки (расплава)	225	°C
Температура формы	25 - 60	°C

Инструкции по впрыску
General In general LUVOCOM® can be processed on conventional injection moulding machines while observing the usual technical guidelines. Any added fibrous materials or fillers may have an abrasive effect. In this case the cylinder and screw should be protected against wear as is usual in the processing of reinforced thermoplastic materials. Lengthy dwell times for the melts in the cylinder should be avoided. Lower the temperatures during interruptions! Predrying (optional) It is advisable to predry the granulate with a suitable dryer immediately before processing. The granulate may absorb moisture from the air. Delivery Form & Storage Unless indicated otherwise, the material is delivered as 3mm-long pellets in sealed bags on pallets. Preferably storage should be effected in dry and normally temperatured rooms Additional Information During processing, the moisture level should not exceed 0.01%, otherwise molecular degradation may occur. As the material absorbs water very rapidly, originally sealed containers should only be opened immediately before processing. The processing notes provided merely represent a recommendation for general use. Due to the large variety of machines, geometries and volumes of parts, etc., it may be necessary to employ different settings according to the specific application. Please contact us for further information.

Инструкции по впрыску

General In general LUVOCOM® can be processed on conventional injection moulding machines while observing the usual technical guidelines. Any added fibrous materials or fillers may have an abrasive effect. In this case the cylinder and screw should be protected against wear as is usual in the processing of reinforced thermoplastic materials. Lengthy dwell times for the melts in the cylinder should be avoided. Lower the temperatures during interruptions! Predrying (optional) It is advisable to predry the granulate with a suitable dryer immediately before processing. The granulate may absorb moisture from the air. Delivery Form & Storage Unless indicated otherwise, the material is delivered as 3mm-long pellets in sealed bags on pallets. Preferably storage should be effected in dry and normally temperatured rooms Additional Information During processing, the moisture level should not exceed 0.01%, otherwise molecular degradation may occur. As the material absorbs water very rapidly, originally sealed containers should only be opened immediately before processing. The processing notes provided merely represent a recommendation for general use. Due to the large variety of machines, geometries and volumes of parts, etc., it may be necessary to employ different settings according to the specific application. Please contact us for further information.

Тип материала	Категория	Производитель
PANDEX TP-2245	PUR, Unspecified	DIC Corporation
Xuchuan XCRH-10	PUR, Unspecified	Xuchuan Chemical (Suzhou) Co., Ltd
Epic Urethane D9970	PUR, Unspecified	Epic Resins
Huafon JF-W-6021	PUR, Unspecified	Huafon Group Co., Ltd.
KRYSTALFLEX™ PE193	PUR-Eth,aliphat	Huntsman Corporation
Baydur® 728 IBS (65 pcf)	PUR-MDI	Covestro - PUR

Получите информацию об этом продукте следующим способом.

Телефон	+086 13424755533
EMAIL US	sales@su-jiao.com
Служба поддержки клиентов Вичат

