- Главная страница
- Поиск продуктов
- PP/EPDM
- TPV Elastoprene® N90A-i00
TPV Elastoprene® N90A-i00
| Категория | PP/EPDM, Polypropylene + EPDM Rubber , PP+EPDM |
| Производитель | Elastómeros Riojanos S.A. |
| Торговая марка | TPV Elastoprene® |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
lBvTEi_TPVElastopreneN90Ai00.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
Ni Series - TPV Elastoprene®
It is a mixture of polypropylene and dynamically vulcanised EPDM rubber (PP/EPDM), with properties similar to those of other rubber products but with better results than traditional plastic materials.
It has good resistance to the effects of ozone, UV rays and diverse chemical products, with an operating temperature of up to 135°C.
It comes in pellet form, and it is transformed by means of traditional machinery used for plastic.
It is a completely recyclable and reusable material.
Recommended for injection and co-injection transformation processes.
The excellent properties of this material make it ideal for the demanding requirements of the automotive industry.
Its main application is for the manufacture of injected and co-injected products that require an elastic functionality in sealing systems.
In the construction industry, it can be used for supports, stops, sealing and expansion joints. It is also used in the manufacture of membranes, tool handles and other types of consumer products.
It is a mixture of polypropylene and dynamically vulcanised EPDM rubber (PP/EPDM), with properties similar to those of other rubber products but with better results than traditional plastic materials.
It has good resistance to the effects of ozone, UV rays and diverse chemical products, with an operating temperature of up to 135°C.
It comes in pellet form, and it is transformed by means of traditional machinery used for plastic.
It is a completely recyclable and reusable material.
Recommended for injection and co-injection transformation processes.
The excellent properties of this material make it ideal for the demanding requirements of the automotive industry.
Its main application is for the manufacture of injected and co-injected products that require an elastic functionality in sealing systems.
In the construction industry, it can be used for supports, stops, sealing and expansion joints. It is also used in the manufacture of membranes, tool handles and other types of consumer products.
| Главная Информация | |
|---|---|
| Характеристики |
|
| Используется |
|
| Рейтинг агентства |
|
| Соответствие RoHS |
|
| Внешний вид |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Плотность | 0.960 | g/cm³ | ISO 1183/A |
| Твердость | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Твердость дюрометра (Shao A, 5 seconds, 6.00mm, injection molding) | 90 | ISO 868 |
| Эластомеры | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Tensile Stress 1(100% Strain, 2.00 mm) | 5.50 | MPa | ISO 37 |
| Tensile Stress 2(Yield, 2.00 mm) | 11.0 | MPa | ISO 37 |
| Удлинение при растяжении 3(Break, 2.00 mm) | 420 | % | ISO 37 |
| Tear Strength 4(23°C, 2.00 mm) | 21 | kN/m | ISO 34-1 |
| Комплект сжатия 5(70°C, 22 hr) | 48 | % | ISO 815 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Температура ломкости | -50.0 | °C | ISO 812 |
| Воспламеняемость | Номинальное значение | Метод испытания | |
|---|---|---|---|
| Огнестойкость (2.0 mm) | HB | UL 94 |
| Дополнительная информация | Номинальное значение | Метод испытания | |
|---|---|---|---|
| Ozone Resistance | 0 Rating | ISO 1431-1 |
| Инъекция | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Температура сушки | 80 | °C | |
| Рекомендуемый Макс измельчения | 20 | % | |
| Температура сопла | 200 - 220 | °C | |
| Температура обработки (расплава) | 180 - 200 | °C |
| Примечание | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| 3 . | 500 mm/min |
| 4 . | Method A, Pant-Shaped Specimen |
| 5 . | Type a |
| Тип материала | Категория | Производитель |
|---|---|---|
| New-prene™ 8280B | PP+EPDM | Total Polymer Vision (Suzhou) Co., LTD |
| New-prene™ 6175N | PP+EPDM | Total Polymer Vision (Suzhou) Co., LTD |
| ENFLEX VU-424-65A | PP+EPDM | Ravago Group |
| Deprene 151-80 | PP+EPDM | Shanghai Lin Gen Rubber Materials Co., Ltd. |
| TPV Elastoprene® N40D-i | PP+EPDM | ELASTORSA Elastomeros Riojanos S.A. |
| TPV Elastoprene® N58A-E | PP+EPDM | ELASTORSA Elastomeros Riojanos S.A. |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved