Описание материалов:
Geon® Ultrafine 170-L120UF is a high molecular weight, ultrafine particle size homopolymer dispersion resin. With the very fine particle size, it provides excellent casting characteristics for thin film applications, and ability to produce even thinner gauge coatings. The excellent dispersibility provides good product throughput during the organosol manufacturing process with the sand milling process reduction or elimination. A high molecular weight resin provides an excellent product performance for end application and gives good chemical resistance properties. The low residual emulsifier level provides good end product performance in the areas of clarity, moisture blush resistance, low taste and odor. This resin is accepted by FDA for use under 21CFR175.300 (food contact application).
| Главная Информация | |
|---|
| Характеристики | - Низкий запах
- Низкий запах
- Высокое разрешение
|
| Используется | - Пленка
- Защитное покрытие
- Нанесение покрытия
|
| Формы | |
| Метод обработки | |
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Удельный вес | 1.40 | g/cm³ | ASTM D792 |
| K-Value 1 | 75.0 | | Internal method |
| Внутренняя вязкость | 1.2 | | ASTM D1243-60-A |
| Влажность-
Карл Фишер 2 | 0.070 | % | Internal method |
| Плотность объема | 272 | g/l | |
| Relative Viscosity 3 | 2.71 | | |
| Анализ заполнения | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Вязкость брокфилда | | | Internal method |
| One Day Viscosity @ 30 rpm 4 | 300 | mPa·s | Internal method |
| One Day Viscosity @ 6 rpm 5 | 525 | mPa·s | Internal method |
| One Hour Viscosity @ 30 rpm 6 | 175 | mPa·s | Internal method |
| One Hour Viscosity @ 6 rpm 7 | 300 | mPa·s | Internal method |
| Дополнительная информация | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Точка очистки-
Измельчение 8 | 5.50 | Hegman | Internal method |
| Северная тонкость-
Измельчение 9 | 6.00 | Hegman | Internal method |
| Остаточный винилхлорид мономер 10 | | ppm | |
| Добываемый метанол 11 | 1.3 | % | Internal method |
| Процесс полимеризации | Dispersion | | |
| Note:The value set forth represent "typical" values and Mexichem Specialty Resins, therefore, makes no representation that the material in any particular shipment will conform to the listed properties.Packaging: This resin is shipped in multi-wall paper bags, net weight 50 lbs, 2500 lbs per pallet. Information shown on the package includes commercial identification number, lot and weight.Geon® STP 1434 (formulation): 100phr Geon® L120UF, 55phr Aromatic100, 20phr Drapex 334-F, 5phr ESO, and 3phr Therm-Chek SP 120 LOHF |
| Примечание |
|---|
| 1 . | Interrelationship |
| 2 . | Karl Fisher-Geon® 683c |
| 3 . | 1% Cyclohexanone |
| 4 . | FF，ALTC-29 |
| 5 . | 95 psi，Geon® 1010 |
| 6 . | One day, V12,Geon®1010 |
| 7 . | Initial, V12,Geon®1010 |
| 8 . | Geon® STP 1434 (with provided formulation) |
| 9 . | Geon® 390 |
| 10 . | Geon® STP 1005 |
| 11 . | Geon® 894 |
