Dow ENDURANCE™ HFDA-0580 BK

Категория TP, Crosslinkable Semiconductive Shielding Compound , TP, Unspecified
Производитель The Dow Chemical Company
Торговая марка Dow ENDURANCE™
Порт Китай Шанхайский порт
Торговые условия FOB, CFR, CIF
Платежное средство L/C, T/T, Western Union
PDF ieXzPM_Dow-ENDURANCE-HFDA-0580-BK.pdf
Контактная информация
EMAIL US sales@su-jiao.com

Служба поддержки клиентов Вичат
Описание материалов:
DOW ENDURANCE™ HFDA-0580 BK is a specially formulated semiconductive, vulcanizable compound designed for use as an extruded strand conductor shield and bonded insulation shield applications in medium voltage crosslinked polyethylene insulated cables.(1) DOW ENDURANCE™ HFDA-0580 BK has stable volume resistivity characteristics at elevated temperatures and is formulated with a polymer system that assists in obtaining minimum shrink back on aluminum conductors, especially solid conductors. DOW ENDURANCE™ HFDA-0580 BK is not recommended for use with bare copper conductors.

Specifications
DOW ENDURANCE™ HFDA-0580 BK is designed for use in power distribution cables. Cables with conductor and insulation shielding of DOW ENDURANCE™ HFDA-0580 BK, prepared using sound commercial fabrication practice, would be expected to meet the following specifications:
  • ANSI/ICEA: S-94-649, S-97-682, S-93-639 / NEMA WC74
  • AEIC: CS8
  • IEC: 60502

(1) DOW ENDURANCE™ HFDA-0580 BK is recommended for use in conjunction with DOW cross-linked polyethylene and tree-retardant cross-linked polyethylene compounds. For other polymer insulations such as EPR and EPDM's the user is cautioned to establish the utility of DOW ENDURANCE™ HFDA-0580 BK with each formulation.
Главная Информация
Используется
  • Полупроводниковый щит среднего напряжения
  • Полупроводниковый щит
  • Подземный Кабель
  • Защита кабеля
  • Применение проводов и кабелей
Рейтинг агентства
  • AEIC CS8
  • ICEA S-93-639
  • ICEA S-94-649
  • ICEA S-97-682
  • IEC 60502
  • (Национальная ассоциация владельцев электротехнических WC-74
Формы
  • Частицы
ФизическийНоминальное значениеЕдиница измеренияМетод испытания
Удельный вес 1.12g/cm³ASTM D792
Экологическое сопротивление растрескиванию (100% Igepal, F0)> 504hrASTM D1693
МеханическиеНоминальное значениеЕдиница измеренияМетод испытания
Прочность на растяжение 16.5MPaASTM D638
Удлинение при растяжении (Break)260%ASTM D638
СтарениеНоминальное значениеЕдиница измеренияМетод испытания
Прочность на растяжение- 1 неделя (150°C)98%ASTM D638
Коэффициент удлинения- 1 неделя (150°C)90%ASTM D638
ТепловойНоминальное значениеЕдиница измеренияМетод испытания
Температура ломкости -40.0°CASTM D746
ЭлектрическийНоминальное значениеЕдиница измеренияМетод испытания
Сопротивление громкости ASTM D991
    23°C 8.0ohms·cmASTM D991
    90°C 15ohms·cmASTM D991
    130°C 12ohms·cmASTM D991
Дополнительная информация
Nominal property values above represent tests on molded, stress-relieved slabs. Cure times were 15 minutes at 175°C.Storage The environment or conditions of storage greatly influences the recommended storage time. Storage should be in accordance with good manufacturing practices. If proper warehousing and storage temperatures [dry conditions, between 50°F and 86°F (10°C and 30°C) in temperature] are utilized, this product may be stored by the customer for up to one year. It is recommended that the practice of using the product on a first-in / first-out basis be established. Storage under extreme conditions may affect the quality, processing, or performance of the product.
ЭкструзияНоминальное значениеЕдиница измерения
Температура сушки 60.0°C
Время сушки < 6.0hr
Температура расплава 121 - 140°C
Инструкции по экструзии
DOW ENDURANCE™ HFDA-0580 BK provides excellent surface finish and outstanding output rates over a broad range of conditions. For optimum results, use melt extrusion temperatures in the suggested range of 250 to 285°F (121 to 140°C) to avoid pre-cure or scorch. Extruder barrel settings of 110°C (230°F) are suggested as a starting point while learning to process DOW ENDURANCE™ HFDA-0580 BK. Specific machine settings will depend on the extruder design and must be established through conventional practices. Dehumidified hopper drying at 140°F (60°C) for up to 6 hours may be employed to remove moisture prior to extrusion. DOW ENDURANCE™ HFDA-0580 BK can be extruded directly over aluminum conductors, but with copper conductors the outer strand layer should be tinned first.
Тип материала Категория Производитель
TABOREX TA 2351 HD TP, Unspecified SILON s.ro
Ultralloy™ 108 White TP, Unspecified Hapco Inc.
Unipren® Elastomers A3 NTLA010 90A IM01S1 UP327 TP, Unspecified Petropol Industry and Trade of Polymers LTDA
Di-Pak™ E-4036 TP, Unspecified Hapco Inc.
DuraStar™ MN631 Polyester, TP Eastman Chemical Company
Ultralloy™ 910-5C TP, Unspecified Hapco Inc.
Получите информацию об этом продукте следующим способом.
Телефон+086 13424755533
EMAIL US sales@su-jiao.com

Служба поддержки клиентов Вичат

Copyright © russianpolymer.com All Rights Reserved
Получите информацию об этом продукте следующим способом.

Служба поддержки клиентов Вичат
Свяжитесь с нами