ISPLEN® PB-110 H2E

ISPLEN® PB-110 H2E is a block ethylene-propylene copolymer with a high molecular weight. Due to averagely good flow properties and very high mechanical properties is a suitable grade to be processed into pipes. Its very high impact strength, even at low temperatures, and stress cracking also can use in critical conditions. Other applications are corrugated pipes for sewage, due to its high modulus

ADDITIVATION
ISPLEN® PB-110 H2E contains stabilizers and additives according to the end-use of the item in order to reinforce the thermal stability and increase the hot-water extraction resistance. The processor may include other additives. Formulation allows polymer stability during the normal conditions of processing and use.

COLOURING
ISPLEN grades are supplied in natural colour but it can be easily coloured with pigments steady at processing temperatures, using dry-colouring or masterbatch techniques.

FOODSTUFF REGULATIONS
ISPLEN® PB-110 H2E is approved for food contact under certain legislation. For more information about specific country regulation, please, contact with our Technical Service.

ISPLEN® PB110H2E is a very low melt flow propylene heterophasic copolymer with a reinforced formulation for extrusion process, and a high thermal stabilisation. Its crystalline structure gives a high rigidity and very high tensile strength resistance. Its flow characteristics and mechanical properties make it specially adapted for high thickness and good glossy surface films or sheets.
It can be easily coloured during the extrusion process using the right pigments, especially in the form of masterbatches with a higher melt flow rate than that of the base polymer.

APPLICATIONS
In extrusion process requiring high melt viscosity strength and particularly high tensile properties, such as:

• Sheets and Profiles

• Blow-molding

• Glossy surface sheets.

• Pipes.

Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.