- Главная страница
- Поиск продуктов
- Epoxy
- Epoxies, Ect. 40-3900
Epoxies, Ect. 40-3900
| Категория | Epoxy, Epoxy; Epoxide |
| Производитель | Epoxies, Etc. |
| Торговая марка | Epoxies, Ect. |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
cn3C9R_Epoxies-Ect-40-3900.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
40-3900 is a two component epoxy adhesive filled with silver. This electrically conductive epoxy resin formulation offers continuity of conductivity with an electrical resistivity value of less than 1x10^-4 ohm-cm. 40-3900 is also well known for its wide operating temperature range, -50 to + 170°C.
40-3900 is specifically designed for adhesive bonding in microelectronic and optoelectronic applications. Due to its excellent continuity, it has also been used extensively in applications such as micro-wave EMI and RFI shielding, in the assembly or repair of printed circuit boards, wave guides, electronic modules, flat cable, high frequency shields, connectors, circuitry, and as a cold solder.
40-3900 is formulated with pure silver (no alloys) and is designed in a convenient 1:1 mix ratio. Both the resin and hardener have silver powder dispersed.
Features:
40-3900 is specifically designed for adhesive bonding in microelectronic and optoelectronic applications. Due to its excellent continuity, it has also been used extensively in applications such as micro-wave EMI and RFI shielding, in the assembly or repair of printed circuit boards, wave guides, electronic modules, flat cable, high frequency shields, connectors, circuitry, and as a cold solder.
40-3900 is formulated with pure silver (no alloys) and is designed in a convenient 1:1 mix ratio. Both the resin and hardener have silver powder dispersed.
Features:
- Electrically conductive
- Thermally conductive
- Room temperature cure
- Easy 1:1 mix ratio
- Good bond strength
| Главная Информация | |
|---|---|
| Наполнитель/армирование |
|
| Характеристики |
|
| Используется |
|
| Внешний вид |
|
| Механические | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Flexural Strength | 70.3 | MPa |
| Тепловой | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Теплопроводность | 7.9 | W/m/K |
| Дополнительная информация | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Operating Temperature | -50.0 to 170 | °C |
| Uncured Properties | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Цвет | Silver | ||
| Смешанное соотношение по весу (PBW) | |||
| Part A | 1.0 | ||
| Part B | 1.0 | ||
| Плотность | |||
| 25°C 1 | 1.80 | g/cm³ | |
| 25°C 2 | 2.97 | g/cm³ | |
| Время отверждения | |||
| 90°C | 0.25 | hr | |
| 65°C | 1.0 | hr | |
| 25°C | 24 | hr | |
| Срок службы горшка 3(25°C) | 60 | min | |
| Срок годности | 12 | month |
| Cured Properties | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Твердость по суше (Shore D) | 70 | ||
| Lap Shear Strength 4 | 4.83 | MPa | |
| Сопротивление громкости | 1.0E-4 | ohms·cm |
| Примечание | |
|---|---|
| 1 . | Part B |
| 2 . | Part A |
| 3 . | 100 grams |
| 4 . | Al to Al |
| Тип материала | Категория | Производитель |
|---|---|---|
| Thermoset Plastics 300 No.65 | Epoxy | Thermoset, Lord Chemical Products |
| VisiJet® SL Flex | Epoxy | 3D Systems |
| KYOCERA KE-G3400 | Epoxy | KYOCERA Chemical Corporation |
| INSULCAST® 125/INSULCURE 11B | Epoxy | ITW Polymers Coatings North America |
| Ablefilm ECF550S | Epoxy | Henkel Ablestik |
| BJB Epoxy TC-1604 A/B | Epoxy | BJB Enterprises, Inc. |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved