- Главная страница
- Поиск продуктов
- HDPE
- SABIC® HDPE F04660 (Blown film)
SABIC® HDPE F04660 (Blown film)
| Категория | HDPE, High Density Polyethylene |
| Производитель | Saudi Basic Industries Corporation (SABIC) |
| Торговая марка | SABIC® HDPE |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
bLSQ4X_SABIC-HDPE-F04660-Blown-film-.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
SABIC® HDPE F04660 is a homopolymer film grade with a broad processing window and high stiffness. It has good moisture barrier properties and can be blended with LDPE and LLDPE to improve film strength and rigidity.
Typical applications
SABIC® HDPE F04660 is typically used for applications where high stiffness is required. It can be used in the middle layer in a coex structure or blended with LDPE and LLDPE to increase stiffness and mechanical properties. It has good water vapor barrier properties required for certain food packaging.
Processing conditions
SABIC® HDPE F04660 can be extruded at melt temperaures between 190 and 220°C.
Film properties
Film properties have been measured on 25 µm blown film with a BUR of 4.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
Typical applications
SABIC® HDPE F04660 is typically used for applications where high stiffness is required. It can be used in the middle layer in a coex structure or blended with LDPE and LLDPE to increase stiffness and mechanical properties. It has good water vapor barrier properties required for certain food packaging.
Processing conditions
SABIC® HDPE F04660 can be extruded at melt temperaures between 190 and 220°C.
Film properties
Film properties have been measured on 25 µm blown film with a BUR of 4.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
| Главная Информация | |
|---|---|
| Характеристики |
|
| Используется |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Плотность | 0.961 | g/cm³ | ASTM D1505 |
| Массовый расход расплава (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.70 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 46 | g/10 min | ASTM D1238 |
| Пленки | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Толщина пленки протестирована | 25 | µm | |
| Эластичный модуль- MD (25 µm, Blown Film) | 1250 | MPa | ASTM D882 |
| Эластичный модуль- TD (25 µm, Blown Film) | 1700 | MPa | ASTM D882 |
| Прочность на растяжение | ASTM D882 | ||
| MD : Broken, 25 µm, blown film | 67.0 | MPa | ASTM D882 |
| TD : Broken, 25 µm, blown film | 37.0 | MPa | ASTM D882 |
| Удлинение при растяжении | ASTM D882 | ||
| MD : Broken, 25 µm, blown film | 490 | % | ASTM D882 |
| TD : Broken, 25 µm, blown film | 3.0 | % | ASTM D882 |
| Ударное падение Dart 1(25 µm, Blown Film) | < 20 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm, blown film | 10 | g | ASTM D1922 |
| TD : 25 µm, blown film | 800 | g | ASTM D1922 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Викат Температура размягчения | 129 | °C | ASTM D1525 |
| Экструзия | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Температура расплава | 190 - 220 | °C |
| Примечание | |
|---|---|
| 1 . | F50 |
| Тип материала | Категория | Производитель |
|---|---|---|
| PRIMALENE WPP792 | HDPE | Southern Polymer, Inc. |
| Qenos PE GM7655 | HDPE, HMW | Qenos Pty Ltd |
| SNOLEN® EF 0.21/46 HT | HDPE | JSC Gazprom neftekhim Salavat |
| Bapolene® 3262 | HDPE | Bamberger Polymers, Inc. |
| Braskem PE SHD7255LS-L | HDPE | Braskem |
| Marlex® 9005 | HDPE | Chevron Phillips Chemical Company LLC |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved