- Главная страница
- Поиск продуктов
- PP
- SABIC® PP 500P
SABIC® PP 500P
| Категория | PP, Polypropylene Homopolymer , PP Homopolymer |
| Производитель | Saudi Basic Industries Corporation (SABIC) |
| Торговая марка | SABIC® PP |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
Ze2OTb_SABIC-PP-500P.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
SABIC® PP 500P is a medium flow, multipurpose grade for extrusion and injection moulding applications.
If applied for extrusion this grade shows an excellent stretch ability and is therefore suitable for tapes and strapping, high tenacity yarns and carpet backing. For thermoforming it shows a unique balance between transparency, impact resistance and thickness uniformity. SABIC PP 500P is suitable for production of injection moulded articles e.g. caps and closures and house ware products, where this grade shows a high stiffness, combined with a fair impact resistance and very good surface hardness.
SABIC® PP 500P is a medium flow grade typically used in extrusion applications like sheet and thermoforming.
SABIC® PP 500P is typically used in dairy, flower pots, yellow fats and disposables plates and cups. However, customers use this grade also in combination with fillers like Talc and CaCO3.
The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.
If applied for extrusion this grade shows an excellent stretch ability and is therefore suitable for tapes and strapping, high tenacity yarns and carpet backing. For thermoforming it shows a unique balance between transparency, impact resistance and thickness uniformity. SABIC PP 500P is suitable for production of injection moulded articles e.g. caps and closures and house ware products, where this grade shows a high stiffness, combined with a fair impact resistance and very good surface hardness.
SABIC® PP 500P is a medium flow grade typically used in extrusion applications like sheet and thermoforming.
SABIC® PP 500P is typically used in dairy, flower pots, yellow fats and disposables plates and cups. However, customers use this grade also in combination with fillers like Talc and CaCO3.
The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.
| Главная Информация | |
|---|---|
| Характеристики |
|
| Используется |
|
| Номер файла UL |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельный вес | 0.905 | g/cm³ | ASTM D792, ISO 1183 |
| Массовый расход расплава (MFR) (230°C/2.16 kg) | 3.1 | g/10 min | ASTM D1238, ISO 1133 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Модуль растяжения | |||
| 1% Secant 1 | 1550 | MPa | ASTM D638 |
| -- | 1550 | MPa | ISO 527-2/1A/1 |
| Прочность на растяжение | |||
| Yield 2 | 36.0 | MPa | ASTM D638 |
| Yield | 37.0 | MPa | ISO 527-2/1A/50 |
| Удлинение при растяжении | |||
| Yield 3 | 10 | % | ASTM D638 |
| Yield | 10 | % | ISO 527-2/1A/50 |
| Воздействие | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Ударная прочность (23°C) | 4.5 | kJ/m² | ISO 179/1eA |
| Зубчатый изод Impact | |||
| 23°C | 35 | J/m | ASTM D256A |
| 23°C | 3.5 | kJ/m² | ISO 180/1A |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Температура отклонения при нагрузке | |||
| 0.45 MPa, Unannealed | 90.0 | °C | ASTM D648 |
| 0.45 MPa, Unannealed 4 | 85.0 | °C | ISO 75-2/Bf |
| 1.8 MPa, Unannealed | 60.0 | °C | ASTM D648 |
| 1.8 MPa, Unannealed 5 | 55.0 | °C | ISO 75-2/Af |
| Викат Температура размягчения | |||
| -- | 152 | °C | ASTM D1525, ISO 306/A 6 6 |
| -- | 88.0 | °C | ASTM D1525, ISO 306/B 7 7 |
| Примечание | |
|---|---|
| 1 . | 1.0 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | testbar 80*10*4mm |
| 5 . | testbar 80*10*4mm |
| 6 . | Rate B (120°C/h), Loading 1 (10 N) |
| 7 . | Rate B (120°C/h), Loading 2 (50 N) |
| Тип материала | Категория | Производитель |
|---|---|---|
| POPELEN HSP-375 | PP Impact Copolymer | Lotte Chemical Corporation |
| Braskem PP CP 295 | PP Impact Copolymer | Braskem |
| GAPEX® HP RPP20EB99HB | PP Homopolymer | Ferro Corporation |
| Hostacom EKC 265N G71350 | PP, Unspecified | LyondellBasell Industries |
| KW Plastics KW 622-30 | PP Copolymer | KW Plastics |
| MAJORIS DG300 | PP, Unspecified | AD majoris |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved