- Главная страница
- Поиск продуктов
- PP
- SABIC® PP PCGR40
SABIC® PP PCGR40
| Категория | PP, Polypropylene Random Copolymer , PP Random Copolymer |
| Производитель | Saudi Basic Industries Corporation (SABIC) |
| Торговая марка | SABIC® PP |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
UfzWYX_SABICPPPCGR40.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
SABIC® PP grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity.
SABIC® PP PCGR40 is a highly transparent polypropylene random copolymer with good antistatic properties. This grade combines improved aesthetics of the finished articles with low temperature processability and a very good organoleptic performance. Part aesthetics are not affected by the lower temperatures, providing for a broader operating window, enabling short cycle times. SABIC® PP PCGR40 results in excellent demoulding characteristics and has a good stiffness to impact ratio.
Typical applications:
SABIC® PP PCGR40 is typically used for injection moulding of housings for empty disposable 3-part syringes. Other applications demanding a high level of transparency and broad processing window are also possible.
Compliance to regulations:
SABIC® PP PCGR40 complies with the food contact regulations and the relevant monographs of the US Pharmacopoeia.
SABIC® PP PCGR40 is a highly transparent polypropylene random copolymer with good antistatic properties. This grade combines improved aesthetics of the finished articles with low temperature processability and a very good organoleptic performance. Part aesthetics are not affected by the lower temperatures, providing for a broader operating window, enabling short cycle times. SABIC® PP PCGR40 results in excellent demoulding characteristics and has a good stiffness to impact ratio.
Typical applications:
SABIC® PP PCGR40 is typically used for injection moulding of housings for empty disposable 3-part syringes. Other applications demanding a high level of transparency and broad processing window are also possible.
Compliance to regulations:
SABIC® PP PCGR40 complies with the food contact regulations and the relevant monographs of the US Pharmacopoeia.
| Главная Информация | |
|---|---|
| Добавка |
|
| Характеристики |
|
| Используется |
|
| Рейтинг агентства |
|
| Внешний вид |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Плотность | 0.905 | g/cm³ | ISO 1183 |
| Массовый расход расплава (MFR) (230°C/2.16 kg) | 40 | g/10 min | ISO 1133 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Модуль растяжения | 1150 | MPa | ISO 527-2/1A/1 |
| Tensile Stress (Yield) | 29.0 | MPa | ISO 527-2/1A/50 |
| Растяжимое напряжение (Yield) | 13 | % | ISO 527-2/1A/50 |
| Воздействие | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Ударная прочность | ISO 179/1eA | ||
| 0°C | 2.0 | kJ/m² | ISO 179/1eA |
| 23°C | 4.5 | kJ/m² | ISO 179/1eA |
| Зубчатый изод Impact | ISO 180/1A | ||
| 0°C | 2.0 | kJ/m² | ISO 180/1A |
| 23°C | 4.0 | kJ/m² | ISO 180/1A |
| Тип материала | Категория | Производитель |
|---|---|---|
| Spartech Polycom F5134T4-1 | PP, Unspecified | Spartech Polycom |
| Razalen® Q121 GR20 | PP Homopolymer | Razin™ Engineering Plastics |
| REPRO PP R820 | PP, Unspecified | Rondo Plast AB |
| TECHLEN M7151 | PP, Unspecified | DAEHA Co., LTD |
| Chiao Fu PP PP212G30 NAT | PP, Unspecified | Chiao Fu Enterprises Co., Ltd. |
| Daelim Po1y® PH-870 | PP Homopolymer | DAELIM INDUSTRIAL CO., LTD. |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved