Ajedium™ Films -- Solef® PVDF 9009
Описание материалов:
Solef® 9009 PVDF homopolymer is a semi-crysalline fluoropolymer. Solef® film is chemically inert to most acids, aliphatic and aromatic organic compounds, chlorinated solvents and alcohols.
Solef® PVDF flim has a very high purity, abrasion resistance comparable to that of polyamides and relatively low coefficient of friction. These films can be used in a wide range of temperatures and have excellent intrinsic fire resistance.
Solef® PVDF films have demonstrated excellent weathering properties and are extremely resistant to UV radiation and common industrial and environmental pollutants.
Solef® PVDF films can be used in a wide range of applications, including release films, filters, chemical resistance lining, outdoor UV resistant needs as well as electric and electronic applications.
| Главная Информация | |
|---|
| Характеристики | |
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Удельный вес | 1.75 - 1.80 | g/cm³ | ASTM D792 |
| Поглощение воды (23°C, 24 hr) | < 0.040 | % | ASTM D570 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Коэффициент трения | | | ASTM D1894 |
| With self-dynamics | 0.15 - 0.35 | | ASTM D1894 |
| With Self-Static | 0.20 - 0.40 | | ASTM D1894 |
| Устойчивость к истиранию (1000 Cycles, 1000 g, CS-10 Wheel) | 5.00 - 10.0 | mg | ASTM D4060 |
| Пленки | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Толщина пленки протестирована | 25 | µm | |
| Сектантный модуль | | | ASTM D882 |
| MD | 2000 | MPa | ASTM D882 |
| TD | 2100 | MPa | ASTM D882 |
| Прочность на растяжение | | | ASTM D882 |
| MD
: Yield | 55.0 | MPa | ASTM D882 |
| TD
: Yield | 56.0 | MPa | ASTM D882 |
| MD
: Fracture | 57.0 | MPa | ASTM D882 |
| TD
: Fracture | 54.0 | MPa | ASTM D882 |
| Удлинение при растяжении | | | ASTM D882 |
| MD
: Yield | 6.0 | % | ASTM D882 |
| TD
: Yield | 6.2 | % | ASTM D882 |
| MD
: Fracture | 200 | % | ASTM D882 |
| TD
: Fracture | 250 | % | ASTM D882 |
| Свободная усадка (130°C) | 0.70 | % | ASTM D2732 |
| Коэффициент площади | 108 | ft²/lb/mil | |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Температура перехода стекла | -40.0 | °C | ASTM D4065 |
| Температура плавления | 162 - 168 | °C | ASTM D3418 |
| Пиковая температура кристаллизации (DSC) | 133 - 140 | °C | ASTM D3418 |
| CLTE-
Поток | 1.4E-4 | cm/cm/°C | ASTM D696 |
| Удельный нагрев (100°C) | 1600 | J/kg/°C | ASTM C351 |
| Теплопроводность | 0.20 | W/m/K | ASTM C177 |
| Электрический | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Удельное сопротивление поверхности | > 1.0E+14 | ohms | ASTM D257 |
| Сопротивление громкости | > 1.0E+14 | ohms·cm | ASTM D257 |
| Диэлектрическая прочность (23°C, 1.00 mm) | 20 - 25 | kV/mm | ASTM D149 |
| Диэлектрическая постоянная | 7.50 | | ASTM D150 |
| Воспламеняемость | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Индекс кислорода (3.00 mm) | 44 | % | ASTM D2863 |
| Дополнительная информация |
|---|
| Standard Thicknesses and Widths
Widths are available from 22" (559 mm) to 56" (1422 mm).
Products with widths <22 inches or >56 inches are available upon request.
Tolerances for widths are +/- 4mm.
For PVDF film, the standard thicknesses are 25 microns (1 mil) to 1016 microns (40 mil).
Surface Finishes
Standard surface finish is P/M (polished / matte).
Custom finishes of P/P (polished / polished) and M/M (matte / matte) are available.
Packaging
Film is supplied in a roll form of high quality, cardboard core of 3" (76mm) or 6" (152mm).
PVC cores are available upon request in 3" and 6" sizes.
Labeling
Products are labeled to comply with national and international standards.
Labels include product grade, unique batch number, roll length, roll width, product thickness, and net weight. |
