- Главная страница
- Поиск продуктов
- PP
- SABIC® PP 571P
SABIC® PP 571P
| Категория | PP, Polypropylene Homopolymer , PP Homopolymer |
| Производитель | Saudi Basic Industries Corporation (SABIC) |
| Торговая марка | SABIC® PP |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
REiFMG_SABIC-PP-571P.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
SABIC® PP 571P is a higher flow material typically used in extrusion applications like sheet and thermoforming. This grade combines higher mfi and high stiffness.
SABIC® PP 571P is typically used in off line thermoforming processes. The higher mfi is seen by our customers as advantages as they can run faster and have better wall thickness control of the sheet. These advances are then extrapolated to the forming step of the process. Other application that could be thought of are blister packaging were very thin packaging is required. The higher mfi makes it easier to run thinner sheet.
This grade is characterized by excellent gloss and good surface hardness. Typical applications are sanitary, closures with and without integral hinges.
The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.
SABIC® PP 571P is typically used in off line thermoforming processes. The higher mfi is seen by our customers as advantages as they can run faster and have better wall thickness control of the sheet. These advances are then extrapolated to the forming step of the process. Other application that could be thought of are blister packaging were very thin packaging is required. The higher mfi makes it easier to run thinner sheet.
This grade is characterized by excellent gloss and good surface hardness. Typical applications are sanitary, closures with and without integral hinges.
The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.
| Главная Информация | |
|---|---|
| Характеристики |
|
| Используется |
|
| Номер файла UL |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельный вес | 0.905 | g/cm³ | ASTM D792, ISO 1183 |
| Массовый расход расплава (MFR) (230°C/2.16 kg) | 5.7 | g/10 min | ASTM D1238, ISO 1133 |
| Твердость | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Твердость Роквелла (R-Scale) | 112 | ASTM D785 | |
| Твердость по суше (Shore D) | 69 | ISO 868 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Модуль растяжения | |||
| 1% Secant 1 | 1800 | MPa | ASTM D638 |
| -- | 1700 | MPa | ISO 527-2/1A/1 |
| Прочность на растяжение | |||
| Yield 2 | 37.0 | MPa | ASTM D638 |
| Yield | 37.0 | MPa | ISO 527-2/1A/50 |
| Удлинение при растяжении | |||
| Yield 3 | 8.0 | % | ASTM D638 |
| Yield | 8.0 | % | ISO 527-2/1A/50 |
| Воздействие | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Ударная прочность (23°C) | 4.0 | kJ/m² | ISO 179/1eA |
| Зубчатый изод Impact | |||
| 23°C | 25 | J/m | ASTM D256A |
| 23°C | 3.0 | kJ/m² | ISO 180/1A |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Температура отклонения при нагрузке | |||
| 0.45 MPa, Unannealed | 90.0 | °C | ASTM D648 |
| 0.45 MPa, Unannealed 4 | 85.0 | °C | ISO 75-2/Bf |
| 1.8 MPa, Unannealed | 60.0 | °C | ASTM D648 |
| 1.8 MPa, Unannealed 5 | 55.0 | °C | ISO 75-2/Af |
| Викат Температура размягчения | |||
| -- | 154 | °C | ASTM D1525, ISO 306/A120 6 6 |
| -- | 95.0 | °C | ASTM D1525, ISO 306/B120 7 7 |
| Примечание | |
|---|---|
| 1 . | 1.0 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | testbar 80*10*4mm |
| 5 . | testbar 80*10*4mm |
| 6 . | Rate B (120°C/h), Loading 1 (10 N) |
| 7 . | Rate B (120°C/h), Loading 2 (50 N) |
| Тип материала | Категория | Производитель |
|---|---|---|
| Scolefin 42 T 13-8 | PP Homopolymer | Ravago Group |
| NEFTEKHIM PP 8300P (EPC30R) | PP Copolymer | Nizhnekamskneftekhim Inc. |
| KOPELEN JI-320 | PP Impact Copolymer | Lotte Chemical Corporation |
| MACOMASS PP MM-PP HG 23 | PP Homopolymer | MACOMASS Verkaufs AG |
| Hifax TYC 462X BLACK | PP Copolymer | LyondellBasell Industries |
| Propafilm™ RGR02/120 | PP Alloy | Innovia Films Ltd. |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved