Описание материалов:
Baytec P-132 system spray elastomer forms a tough, mar resistant coating with a hardness of 95 Shore A. As with any product, use of Baytec P-132 system in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability for use.
| Твердость | Номинальное значение | | Метод испытания |
|---|
| Твердость дюрометра (Shore A) | 93 - 98 | | ASTM D2240 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Устойчивость к истиранию (1000 Cycles) | 139 | mg | ASTM D1044 |
| Эластомеры | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Прочность на растяжение | 12.9 | MPa | ASTM D412 |
| Удлинение при растяжении (Break) | 75 | % | ASTM D412 |
| Tear Strength | 31.5 | kN/m | ASTM D624 |
| Термокомплект | Номинальное значение | | |
|---|
| Компоненты термокомплекта | | | |
| Component a | Mixing ratio by weight: 50, mixing ratio by capacity: 1.0 | | |
| Component B | Mixing ratio by weight: 100, mixing ratio by capacity: 2.4 | | |
| Дополнительная информация |
|---|
| Part A
Appearance: Dark brown liquid
Specific Gravity @ 77°F: 1.24
Viscosity @77°F: 150 to 250 cps
Part B
Appearance: Off-white liquid
Specific Gravity @ 77°F: 1.003 to 1.009
Viscosity @77°F: 800 to 1200 cps
Hand Mix Reaction Profile at 77°F
Gel Time: 50 to 60 sec |
