- Главная страница
- Поиск продуктов
- Silicone
- Silastic® Q7-4735
Silastic® Q7-4735
| Категория | Silicone |
| Производитель | Dow Corning Corporation |
| Торговая марка | Silastic® |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
Pk4ckC_SilasticQ74735.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
Raw materials for medical device fabrication in the Healthcare Industry
APPLICATIONS
Silastic® BioMedical Grade ETR Elastomers (Q7-4720, Q7-4735, Q7-4750, Q7-4765, and Q7-4780) are heat-cured high consistency silicone rubbers designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.
DESCRIPTION
Silastic BioMedical Grade ETR Elastomers (Q7-4720, Q7-4735, Q7-4750, Q7-4765, and Q7-4780) are a series of two-part, enhanced-tear-resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry
APPLICATIONS
Silastic® BioMedical Grade ETR Elastomers (Q7-4720, Q7-4735, Q7-4750, Q7-4765, and Q7-4780) are heat-cured high consistency silicone rubbers designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.
DESCRIPTION
Silastic BioMedical Grade ETR Elastomers (Q7-4720, Q7-4735, Q7-4750, Q7-4765, and Q7-4780) are a series of two-part, enhanced-tear-resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry
| Главная Информация | |
|---|---|
| Характеристики |
|
| Используется |
|
| Рейтинг агентства |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельный вес | 1.12 | g/cm³ | ASTM D792 |
| Формовочная усадка- Поток | 1.6 | % |
| Твердость | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Твердость дюрометра (Shore A) | 35 | ASTM D2240 |
| Эластомеры | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Tensile Stress (200% Strain) | 1.11 | MPa | ASTM D412 |
| Прочность на растяжение | 9.84 | MPa | ASTM D412 |
| Удлинение при растяжении (Break) | 1200 | % | ASTM D412 |
| Tear Strength 1 | 36.6 | kN/m | ASTM D624 |
| Комплект сжатия | 43 | % | ASTM D395 |
| Примечание | |
|---|---|
| 1 . | B mould |
| Тип материала | Категория | Производитель |
|---|---|---|
| POWERSIL® 3540 | Silicone | Wacker Chemie AG |
| Thermoset Plastics SC-139 | Silicone | Thermoset, Lord Chemical Products |
| DJSilicone NE-341 | Silicone | DONGJUE SILICONE (NANJING) CO., LTD |
| DJSilicone NE-7160 | Silicone | DONGJUE SILICONE (NANJING) CO., LTD |
| ELASTOSIL® AUX PRIMER G 3241 | Silicone | Wacker Chemie AG |
| ELASTOSIL® P 7950 A/B | Silicone | Wacker Chemie AG |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved