Описание материалов:
Medalist MD-37063 is a specialty thermoplastic elastomer designed for overmolding applications in the medical and healthcare industry. Medalist MD-37063 is a translucent, medium hardness, lubricated grade that can be sterilized and exhibits excellent adhesion to PC, ABS, and PC/ABS.
| Главная Информация | |
|---|
| Характеристики | - Хорошая дезинфекция
- Сплоченность
- Промежуточная плотность
- Средняя твердость
|
| Используется | - Оборудование для безопасности
- Препараты
- Медицинские принадлежности/принадлежности для ухода
|
| Соответствие RoHS | |
| Внешний вид | |
| Формы | |
| Метод обработки | |
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Удельный вес | 0.958 | g/cm³ | ASTM D792 |
| Массовый расход расплава (MFR) | | | ASTM D1238 |
| 190°C/2.16 kg | 2.0 | g/10 min | ASTM D1238 |
| 210°C/5.0 kg | 30 | g/10 min | ASTM D1238 |
| Твердость | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Твердость дюрометра | | | ASTM D2240 |
| Shaw A | 65 | | ASTM D2240 |
| Shaw A, 5 seconds | 63 | | ASTM D2240 |
| Эластомеры | Номинальное значение | Единица измерения | Метод испытания |
|---|
| Tensile Stress (300% Strain) | 4.48 | MPa | ASTM D412 |
| Прочность на растяжение (Break) | 8.96 | MPa | ASTM D412 |
| Удлинение при растяжении (Break) | 600 | % | ASTM D412 |
| Дополнительная информация | Номинальное значение | | |
|---|
| Адгезия к ABS | | | |
| Адгезия к ПК | | | |
| Адгезия к ПК/ABS | | | |
| Юридическое заявление |
|---|
| The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries. |
| Инъекция | Номинальное значение | Единица измерения | |
|---|
| Задняя температура | 127 - 149 | °C | |
| Средняя температура | 138 - 160 | °C | |
| Передняя температура | 149 - 171 | °C | |
| Температура сопла | 171 - 193 | °C | |
| Температура обработки (расплава) | 171 - 193 | °C | |
| Температура формы | 21 - 38 | °C | |
| Давление впрыска | 1.38 - 5.52 | MPa | |
| Back Pressure | 0.172 - 0.689 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Подушка | 3.81 - 25.4 | mm | |
| Инструкции по впрыску |
|---|
| Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C). |
