- Главная страница
- Поиск продуктов
- PP
- Pinnacle PP 5120H
Pinnacle PP 5120H
| Категория | PP, Polypropylene Random Copolymer , PP Random Copolymer |
| Производитель | Pinnacle Polymers |
| Торговая марка | Pinnacle PP |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
PfPUnL_Pinnacle-PP-5120H.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
20 MELT FLOW RANDOM COPOLYMER FOR INJECTION MOLDING
Pinnacle Polymers Polypropylene 5120H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.
This product is intended for caps, closures, and general purpose injection molding applications. This product contains a nucleation and antistatic additive package.
The 5120H product provides:
Pinnacle's polypropylene, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 3.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.
Pinnacle Polymers Polypropylene 5120H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.
This product is intended for caps, closures, and general purpose injection molding applications. This product contains a nucleation and antistatic additive package.
The 5120H product provides:
- Superior color and processing stability
- Low odor
- Good flow and set-up behavior
- Antistatic properties
- Excellent lot-to-lot consistency
Pinnacle's polypropylene, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 3.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.
| Главная Информация | |
|---|---|
| Добавка |
|
| Характеристики |
|
| Используется |
|
| Рейтинг агентства |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Плотность | 0.900 | g/cm³ | ASTM D1505 |
| Массовый расход расплава (MFR) (230°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Прочность на растяжение 1(Yield, 3.20 mm, Injection Molded) | 25.5 | MPa | ASTM D638 |
| Удлинение при растяжении 2(Yield, 3.20 mm, Injection Molded) | 12 | % | ASTM D638 |
| Флекторный модуль- 1% Secant 3(3.20 mm, Injection Molded) | 945 | MPa | ASTM D790A |
| Воздействие | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Зубчатый изод Impact 4(23°C, 3.20 mm, Injection Molded) | 53 | J/m | ASTM D256 |
| Зубчатый изод удара (площадь) 5(23°C, 3.20 mm, Injection Molded) | 5.20 | kJ/m² | ASTM D256 |
| Примечание | |
|---|---|
| 1 . | Type I, 51 mm/min |
| 2 . | Type I, 51 mm/min |
| 3 . | Type I, 1.3 mm/min |
| 4 . | Type I |
| 5 . | Type I |
| Тип материала | Категория | Производитель |
|---|---|---|
| Sanren M2101R (On-spec.) | PP Copolymer | SINOPEC Shanghai Petrochemical Co. Ltd. |
| Jampilen EP548R | PP Copolymer | Jam Polypropylene Company |
| ADENE® B36VYBG-02 | PP Copolymer | A.D. Compound S.p.A. |
| ACCUTECH™ CP0436C30L | PP Copolymer | ACLO Compounders Inc. |
| GAPEX® RPP30EU02HB-BK | PP Copolymer | Ferro Corporation |
| Maxxam™ MX5200-5004 RS BLACK | PP Homopolymer | PolyOne Corporation |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved