Purgex™ 3057 Plus

Категория	PE, Polyethylene , PE, Unspecified
Производитель	Neutrex, Inc.
Торговая марка	Purgex™
Порт	Китай Шанхайский порт
Торговые условия	FOB, CFR, CIF
Платежное средство	L/C, T/T, Western Union
PDF	OC7ygm_Purgex-3057-Plus.pdf
Контактная информация	EMAIL US  sales@su-jiao.com Служба поддержки клиентов Вичат

Описание материалов:

Blend, polyethylene, 3% glass, and FDA-approved active component

Non-toxic, non-abrasive and safe

Ready to use and easy to remove

Temperature Range:

Operating temperature range of 300°F to 600°F (149°C to 316°C)

Applications:

PURGEX 3057 Plus thoroughly removes all types of colorants and engineering resins, such as nylon and polycarbonate, from the barrel, screw, and nozzle of thermoplastic resin injection molding, extrusion, or blow molding equipment, as well as hot runner systems.

PURGEX 3057 Plus includes a modified polyethylene for higher temperature resins. PURGEX 3057 Plus can be used for rapid turnaround on color and material changes with challenging resins such as LCP, PBT, and PPO, on alloys such as PC/ABS, and is recommended for glass- or mineral-filled applications. This blend operates up to 600°F (316°C) with a five minute soak, or higher temperatures without a soak.

Главная Информация
Используется	Очистительная смесь
Метод обработки	Экструзия Литье под давлением

Инструкции по впрыску
Empty barrel of production resin. Add PURGEX 3057 Plus to the hopper (a minimum of 1.5 times the injection capacity). Purge the barrel until PURGEX exits the nozzle. Soak five minutes at processing temperature with barrel full and screw in forward position. Purge barrel to empty. Follow with next production resin, rinsing PURGEX from machine. Resume molding.

Инструкции по экструзии
Empty extruder. Remove screen. Seal vent. Fill extruder with PURGEX 3057 Plus. Make certain extruder is full and PURGEX is exiting the nozzle as a foaming material. Soak five minutes at processing temperature. Add the next resin to be extruded and remove all PURGEX from the extruder. When it appears that PURGEX has been completely removed, replace the screen, open the vent, and commence production.

Инструкции по экструзии

Empty extruder. Remove screen. Seal vent. Fill extruder with PURGEX 3057 Plus. Make certain extruder is full and PURGEX is exiting the nozzle as a foaming material. Soak five minutes at processing temperature. Add the next resin to be extruded and remove all PURGEX from the extruder. When it appears that PURGEX has been completely removed, replace the screen, open the vent, and commence production.

Тип материала	Категория	Производитель
REDI-LINK™ DFDA-5440 NT	PE, Unspecified	The Dow Chemical Company
REVOLVE® M-765	PE, Unspecified	Matrix Polymers
UBE Polyethylene F023	PE, Unspecified	UBE America, Inc.
ADMER™ NF578A	PE, Unspecified	Mitsui Chemicals America, Inc.
Favorite MDLLN	PE, Unspecified	Favorite Plastics
Hyundai EP Adhesives LE102T/1002	PE, Unspecified	HYUNDAI EP Co., Ltd.

Получите информацию об этом продукте следующим способом.

Телефон	+086 13424755533
EMAIL US	sales@su-jiao.com
Служба поддержки клиентов Вичат

