- Главная страница
- Поиск продуктов
- PA6
- CompaMid® PA 6 GK 30
CompaMid® PA 6 GK 30
| Категория | PA6, Polyamide 6 , Nylon 6 |
| Производитель | DimeLika Plast GmbH |
| Торговая марка | CompaMid® |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
NiGgMp_CompaMid-PA-6-GK-30.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
Our new crosslinkable CompaMid® PA 6 compounds are thermoplastic polymers which behave like elastomers over a wide temperature range as a result of beta radiation cross-linking. Thanks to crosslinking, the originally thermoplastic material can withstand significantly higher temperatures of up to 350 °C, thus providing greater shape retention under thermal load. Due to its excellent performance profile, crosslinkable CompaMid® PA 6 can replace costly high-performance plastics such as PPA, PPS or LCP in many cases. No mould changes are required when switching from standard PA 6 to CompaMid® PA 6, and the process parameters also remain the same.
Electrical Applications
Thanks to their outstanding electrical and mechanical properties, crosslinkable CompaMid® PA 6 compounds are ideally suited for applications in the electrical and electronics industries.
Automotive Applications
Crosslinked components made of CompaMid® PA 6 are used in the engine bay and exhaust system, where requirements are the toughest for heat resistance and shape retention, as well as resistance to salts, chemicals and corrosive media.
Electrical Applications
Thanks to their outstanding electrical and mechanical properties, crosslinkable CompaMid® PA 6 compounds are ideally suited for applications in the electrical and electronics industries.
Automotive Applications
Crosslinked components made of CompaMid® PA 6 are used in the engine bay and exhaust system, where requirements are the toughest for heat resistance and shape retention, as well as resistance to salts, chemicals and corrosive media.
| Главная Информация | |
|---|---|
| Наполнитель/армирование |
|
| Характеристики |
|
| Физический | Сухой | Состояние | Единица измерения | Метод испытания |
|---|---|---|---|---|
| Плотность | 1.33 | -- | g/cm³ | ISO 1183 |
| Формовочная усадка 1 | ISO 294-4 | |||
| Across Flow : 80°C | 1.0 | -- | % | |
| Flow : 80°C | 0.95 | -- | % | |
| Поглощение воды | ISO 62 | |||
| Saturation, 23°C | 8.0 | -- | % | |
| Equilibrium, 23°C, 50% RH | 2.0 | -- | % | |
| Номер вязкости | 150 | -- | cm³/g | ISO 307 |
| Механические | Сухой | Состояние | Единица измерения | Метод испытания |
|---|---|---|---|---|
| Модуль растяжения | 4200 | 1500 | MPa | ISO 527-2/1 |
| Tensile Stress | ISO 527-2/50 | |||
| Yield | 85.0 | 55.0 | MPa | |
| Break | 75.0 | 35.0 | MPa | |
| Растяжимое напряжение | ISO 527-2/50 | |||
| Yield | 2.0 | 3.5 | % | |
| Break | 4.0 | > 50 | % |
| Воздействие | Сухой | Состояние | Единица измерения | Метод испытания |
|---|---|---|---|---|
| Ударная прочность | ISO 179/1eA | |||
| -30°C | 2.0 | 2.0 | kJ/m² | |
| 23°C | 3.0 | 3.0 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 23 | 25 | kJ/m² | |
| 23°C | 35 | > 100 | kJ/m² |
| Тепловой | Сухой | Состояние | Единица измерения | Метод испытания |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 190 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 80.0 | -- | °C | ISO 75-2/A |
| Викат Температура размягчения | 200 | -- | °C | ISO 306/B120 |
| Температура плавления | 222 | -- | °C | ISO 11357-3 |
| CLTE | ISO 11359-2 | |||
| Flow : 23 to 80°C | 8.0E-5 to 1.0E-4 | -- | cm/cm/°C | |
| Transverse : 23 to 80°C | 8.0E-5 to 1.0E-4 | -- | cm/cm/°C | |
| Heat Distortion | < 350 | < 350 | °C |
| Электрический | Сухой | Состояние | Единица измерения | Метод испытания |
|---|---|---|---|---|
| Удельное сопротивление поверхности | 1.0E+10 | -- | ohms | IEC 60093 |
| Сопротивление громкости | 1.0E+15 | -- | ohms·cm | IEC 60093 |
| Электрическая прочность (1.00 mm) | 31 | -- | kV/mm | IEC 60243-1 |
| Относительная проницаемость (1 MHz) | 3.90 | -- | IEC 60250 | |
| Comparative Tracking Index (Solution A) | 575 | -- | V | IEC 60112 |
| Воспламеняемость | Сухой | Состояние | Единица измерения | Метод испытания |
|---|---|---|---|---|
| Огнестойкость (0.800 mm) | HB | -- | UL 94 |
| Примечание | |
|---|---|
| 1 . | 260 °CWZ, 600 Bar |
| Тип материала | Категория | Производитель |
|---|---|---|
| Sup-tech B101EX | Nylon 6 | Shanghai Suptech Engineering Plastics Co. Ltd. |
| Surlyn Reflection Series® SURSG201UN | Nylon 6 | LTL Color Compounders, Inc. |
| Akulon® F130-C | Nylon 6 | DSM Engineering Plastics |
| AKROMID® B3 GFM 10/20 1 black 950089 (2017) | Nylon 6 | AKRO-PLASTIC GmbH |
| Isocor™ TT52SI | Nylon 6 | Shakespeare Monofilaments and Specialty Polymers |
| TECHNYL® C 216 V35 NATURAL | Nylon 6 | Solvay Engineering Plastics |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved