- Главная страница
- Поиск продуктов
- Silicone
- NuSil MED-4820
NuSil MED-4820
| Категория | Silicone, Silicone Rubber, LSR |
| Производитель | NuSil Technology |
| Торговая марка | NuSil |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
KgMreI_NuSil-MED-4820.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).
Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts.
LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength.
Comments: INJECTION MOLDING ELASTOMER
Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts.
LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength.
Comments: INJECTION MOLDING ELASTOMER
| Главная Информация | |
|---|---|
| Наполнитель/армирование |
|
| Характеристики |
|
| Используется |
|
| Рейтинг агентства |
|
| Формы |
|
| Метод обработки |
|
| Механические | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Прочность на растяжение (200% Strain) | 0.448 | MPa |
| Термокомплект | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Компоненты термокомплекта | |||
| Part A | Mix Ratio by Weight: 1.0 | ||
| Part B | Mix Ratio by Weight: 1.0 |
| Дополнительная информация | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Cure System | Platinum | ||
| Extrusion Rate | 35.0 | g/min |
| Uncured Properties | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Плотность | 1.13 | g/cm³ | |
| Время отверждения (150°C) | 0.083 | hr | |
| Срок службы горшка (25°C) | > 1400 | min |
| Cured Properties | Номинальное значение | Единица измерения | |
|---|---|---|---|
| Твердость по суше (Shore A) | 20 | ||
| Прочность на растяжение | 6.89 | MPa | |
| Удлинение при разрыве | 900 | % | |
| Tear Strength | 21.9 | kN/m |
| Тип материала | Категория | Производитель |
|---|---|---|
| DJSilicone NE-261 | Silicone | DONGJUE SILICONE (NANJING) CO., LTD |
| ELASTOSIL® LR 3072/40 A/B | Silicone | Wacker Chemie AG |
| ELASTOSIL® R 101/35 | Silicone | Wacker Chemie AG |
| LightSpan® LS4-3354 | Silicone | NuSil Technology |
| Silopren® LSR 3386/40 | Silicone Rubber, LSR | Momentive Performance Materials Inc. |
| SQUARE® LIM1520-45A/B | Silicone Rubber, LSR | Shenzhen SQUARE Silicone Co., Ltd. |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved