Dow ENDURANCE™ HFDA-0693 BK LS

Категория TP, Strippable Semiconductive Insulation Shielding Compound , TP, Unspecified
Производитель The Dow Chemical Company
Торговая марка Dow ENDURANCE™
Порт Китай Шанхайский порт
Торговые условия FOB, CFR, CIF
Платежное средство L/C, T/T, Western Union
PDF KAzBCn_Dow-ENDURANCE-HFDA-0693-BK-LS.pdf
Контактная информация
EMAIL US sales@su-jiao.com

Служба поддержки клиентов Вичат
Описание материалов:
DOW ENDURANCE™ HFDA-0693 BK LS is specially formulated semiconductive, vulcanizable compound designed for use in conventional extrusion practices as a strippable insulation shield for medium voltage power cable. DOW ENDURANCE™ HFDA-0693 BK LS was designed to have excellent extrusion processing. DOW ENDURANCE™ HFDA-0693 BK LS is an easy stripping insulation shield recommended for use over DOW ENDURANCE™ crosslinked polyethylene compounds. This product provides low strip force over a wide temperature range when used in conjunction with Dow insulation materials.

Specifications:
DOW ENDURANCE™ HFDA-0693 BK LS is designed for use in power distribution cables. Cables with conductor and insulation shielding of DOW ENDURANCE™ HFDA-0693 BK LS, prepared using sound commercial fabrication practice, would be expected to meet the following specifications:
  • ANSI/ICEA: S-94-649, S-97-682, S-93-639 / NEMA WC74
  • AEIC: CS 8
  • IEC 60502
Главная Информация
Используется
  • Полупроводниковый щит среднего напряжения
  • Полупроводниковый щит
  • Подземный Кабель
  • Защита кабеля
  • Применение проводов и кабелей
Рейтинг агентства
  • AEIC CS8
  • ICEA S-93-639
  • ICEA S-94-649
  • ICEA S-97-682
  • IEC 60502
  • (Национальная ассоциация владельцев электротехнических WC-74
Формы
  • Частицы
ФизическийНоминальное значениеЕдиница измеренияМетод испытания
Плотность 1.18g/cm³ASTM D1505
МеханическиеНоминальное значениеЕдиница измеренияМетод испытания
Прочность на растяжение ASTM D638
    Fracture 14.5MPaASTM D638
    Fracture, 136°C 113.8MPaASTM D638
Удлинение при растяжении ASTM D638
    Fracture 280%ASTM D638
    Fracture, 136°C 2150%ASTM D638
ТепловойНоминальное значениеЕдиница измеренияМетод испытания
Температура ломкости < -40.0°CASTM D746
ЭлектрическийНоминальное значениеЕдиница измеренияМетод испытания
Сопротивление громкости
    23°C 31.0E+2 - 4.0E+2ohms·cmS-66-524
    23°C 425ohms·cmASTM D991
    90°C 51.0E+2 - 4.0E+2ohms·cmS-66-524
    90°C 630ohms·cmASTM D991
    110°C 71.0E+2 - 4.0E+2ohms·cmS-66-524
    110°C 830ohms·cmASTM D991
Дополнительная информацияНоминальное значениеЕдиница измеренияМетод испытания
Сила сцепления кабеля- Сухое лечение 9(23°C)2.1 - 4.2kN/mInternal method
ЭкструзияНоминальное значениеЕдиница измерения
Кормовая часть экструдера 43 - 60°C
Дополнительная информацияНоминальное значениеЕдиница измеренияМетод испытания
Nominal property values above represent tests on molded stress-relieved slabs. Cure times were 15 minutes at 175°C.Storage The environment or conditions of storage greatly influences the recommended storage time. Storage should be in accordance with good manufacturing practices. If proper warehousing and storage temperatures [dry conditions, between 50°F and 75°F (10°C and 23°C) in temperature] are utilized, this product may be stored by the customer for up to one year. It is recommended that the practice of using the product on a first-in / first-out basis be established. Storage under extreme conditions may affect the quality, processing, or performance of the product. Storage at elevated temperatures should be avoided to prevent blocking. Pellets are readily friable should blocking be experienced.
ЭкструзияНоминальное значениеЕдиница измерения
Зона цилиндра 1 темп. 82.2 - 87.8°C
Зона цилиндра 2 температура. 93.3 - 98.9°C
Зона цилиндра 3 темп. 98.9 - 110°C
Зона цилиндра 4 темп. 104 - 110°C
Зона цилиндра 5 темп. 107 - 110°C
Температура расплава 115 - 125°C
Инструкции по экструзии
DOW ENDURANCE™ HFDA-0693 BK LS provides excellent surface finish and outstanding output rates over a broad range of conditions. For optimum results, use melt extrusion temperatures in the suggested range of 235 to 255°F (115 to 125°C) to avoid pre-cure or scorch. Extruder barrel settings of 110°C (230°F) are suggested as a starting point while learning to process DOW ENDURANCE™ HFDA-0693 BK LS. Specific machine settings will depend on the extruder design and must be established through conventional practices. The curing temperature should be carefully controlled, and the maximum surface temperature in the CV tube should not exceed 527°F (275°C) for optimum results. Extruder feed-throat cooling is recommended to improve feed efficiency.DOW ENDURANCE™ HFDA-0693 BK LS can be handled in the same fashion as other vulcanizable polyolefin semiconductive materials. It is available in regular or UNICLEAN™ boxes and can be air-conveyed at transport temperatures of 75°F (24°C) or below. Do not use a heated dryer with HFDA-0693 BK as pellets may fuse. During shutdowns exceeding one hour, DOW ENDURANCE™ HFDA-0693 BK LS pellets should be removed from potentially warm hopper bins to avoid fusing.
Примечание
1 .1 week
2 .1 week
3 .on cables
4 .on plaques
5 .on cables
6 .on plaques
7 .on cables
8 .on plaques
9 .Cable adhesion values are typical for dry cure at room temperature. Values will vary with cable size, insulation type, type of cure, temperature, speed of test, etc.
Тип материала Категория Производитель
Exxelor™ PE 1040 TP, Unspecified ExxonMobil Chemical
Di-Pak™ E-4666 TP, Unspecified Hapco Inc.
Dow ENDURANCE™ HFDA-0800 BK EC TP, Unspecified The Dow Chemical Company
Elvaloy® HP662 TP, Unspecified DuPont Packaging & Industrial Polymers
UNIGARD™ HP DGDD-1430 NT TP, Unspecified The Dow Chemical Company
MEGOLON™ S300 TP, Unspecified AlphaGary
Получите информацию об этом продукте следующим способом.
Телефон+086 13424755533
EMAIL US sales@su-jiao.com

Служба поддержки клиентов Вичат

Copyright © russianpolymer.com All Rights Reserved
Получите информацию об этом продукте следующим способом.

Служба поддержки клиентов Вичат
Свяжитесь с нами