- Главная страница
- Поиск продуктов
- UHMWPE
- DuraSurf™ UV
DuraSurf™ UV
| Категория | UHMWPE, Ultra High Molecular Weight Polyethylene |
| Производитель | Crown Plastics |
| Торговая марка | DuraSurf™ |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
IFLxsa_DuraSurf-UV.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
DuraSurf™ UV is a UHMW blend specifically designed to meet the rigors and harsh environments of the outdoors. Standard UHMW materials are not UV stable and can break down over time due to exposure. DuraSurf™ UV has the highest UV stability in the industry and can last up to 10 times longer in the outdoors than standard UHMW products. DuraSurf™ UV is available in a standard wear strip or can be supplied with an adhesive backing for easy installation. A wide range of adhesive systems are available designed to meet virtually any application.
AVAILABLE THICKNESS
.005" (.125 mm), .010" (.25 mm), .015"(.38 mm), .020" (.5 mm), .031" (.75 mm), .040" (1 mm),
.050" (1.3 mm), .062" (1.57 mm), .080" (2 mm) .093" (2.35 mm), 100" (2.5 mm), .125" (3.17 mm)
AVAILABLE WIDTHS
All dimensions between 1/4" (6.35 mm) and 24" (610 mm)
UHMW PROPERTIES
AVAILABLE THICKNESS
.005" (.125 mm), .010" (.25 mm), .015"(.38 mm), .020" (.5 mm), .031" (.75 mm), .040" (1 mm),
.050" (1.3 mm), .062" (1.57 mm), .080" (2 mm) .093" (2.35 mm), 100" (2.5 mm), .125" (3.17 mm)
AVAILABLE WIDTHS
All dimensions between 1/4" (6.35 mm) and 24" (610 mm)
UHMW PROPERTIES
- Excellent abrasion and wear resistance
- Very high impact strength
- Meets FDA and USDA guidelines
- No moisture absorption
- Self-lubricating - no need for oils or lubricants
- Excellent noise abatement properties
- Chemical resistance and corrosion resistant
- Maintains performance and properties at -30°C
- Meets ASTM-D-4020-81
- Low coefficient of friction
| Главная Информация | |
|---|---|
| Добавка |
|
| Характеристики |
|
| Используется |
|
| Рейтинг агентства |
|
| Формы |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельный вес 1 | 0.930 | g/cm³ | ASTM D792 |
| Crystallinity | ASTM D3417 | ||
| 762.0 µm | 48 | % | |
| 1.52 mm | 47 | % | |
| 3.18 mm | 50 | % | |
| Relative Viscosity | ASTM D4020 | ||
| 762.0 µm | 230 to 350 | cm³/g | |
| 1.52 mm | 230 to 350 | cm³/g | |
| 3.18 mm | 230 to 350 | cm³/g |
| Электрический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Static Decay | |||
| 762.0 µm | < 10 | msec | |
| 1.52 mm | < 10 | msec | |
| 3.18 mm | < 10 | msec |
| Твердость | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Твердость дюрометра | ASTM D2240 | ||
| Shore D, 0.762 mm | 65 | ||
| Shore D, 1.52 mm | 65 | ||
| Shore D, 3.18 mm | 65 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Модуль растяжения | ASTM D638 | ||
| 0.762 mm | 725 | MPa | |
| 1.52 mm | 731 | MPa | |
| 3.18 mm | 672 | MPa | |
| Прочность на растяжение | ASTM D638 | ||
| Yield, 0.762 mm | 23.0 | MPa | |
| Yield, 1.52 mm | 20.0 | MPa | |
| Yield, 3.18 mm | 22.0 | MPa | |
| Break, 0.762 mm | 53.0 | MPa | |
| Break, 1.52 mm | 49.0 | MPa | |
| Break, 3.18 mm | 44.0 | MPa | |
| Удлинение при растяжении | ASTM D638 | ||
| Break, 0.762 mm | 60 | % | |
| Break, 1.52 mm | 460 | % | |
| Break, 3.18 mm | 470 | % | |
| Коэффициент трения | ASTM D1894 | ||
| vs. Itself - Dynamic 2 | 0.14 | ||
| vs. Itself - Dynamic 3 | 0.14 | ||
| vs. Itself - Dynamic 4 | 0.13 | ||
| vs. Itself - Static 5 | 0.16 | ||
| vs. Itself - Static 6 | 0.16 | ||
| vs. Itself - Static 7 | 0.16 | ||
| vs. Steel - Dynamic 8 | 0.050 to 0.080 | ||
| vs. Steel - Dynamic 9 | 0.050 to 0.10 | ||
| vs. Steel - Dynamic 10 | 0.10 to 0.22 |
| Воздействие | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Зубчатый изод Impact 11(3.18 mm) | 80 | J/m | ASTM D256 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Пиковая температура плавления | |||
| -- 12 | 134 | °C | |
| -- 13 | 136 | °C | |
| CLTE- Поток | ASTM D696 | ||
| -100 to -20°C, 3.18 mm | 9.2E-4 | cm/cm/°C | |
| 20 to 100°C, 3.18 mm | 1.5E-4 | cm/cm/°C |
| Электрический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельное сопротивление поверхности | ASTM D257 | ||
| 0.762 mm | 1.0E+3 | ohms | |
| 1.52 mm | 1.0E+3 | ohms | |
| 3.18 mm | 1.0E+3 | ohms | |
| Сопротивление громкости | ASTM D257 | ||
| 0.762 mm | 6.0E+7 | ohms·cm | |
| 1.52 mm | 1.5E+7 | ohms·cm | |
| 3.18 mm | > 2.0E+7 | ohms·cm | |
| Диэлектрическая прочность (3.18 mm) | 14 | kV/mm | ASTM D149 |
| Диэлектрическая постоянная | ASTM D150 | ||
| 0.762 mm | 2.48 | ||
| 1.52 mm | 2.45 | ||
| 3.18 mm | 2.54 | ||
| Коэффициент рассеивания | ASTM D150 | ||
| 0.762 mm, 50 Hz | 0.059 | ||
| 0.762 mm, 10 kHz | 0.11 | ||
| 0.762 mm, 5 MHz | 0.10 | ||
| 1.52 mm, 50 Hz | 0.021 | ||
| 1.52 mm, 10 kHz | 0.069 | ||
| 1.52 mm, 5 MHz | 0.23 | ||
| 3.18 mm, 50 Hz | 8.2E-3 | ||
| 3.18 mm, 10 kHz | 2.2E-3 | ||
| 3.18 mm, 5 MHz | 3.4E-3 |
| Примечание | |
|---|---|
| 1 . | 0.125 inches |
| 2 . | 0.03 inches |
| 3 . | 0.125 inches |
| 4 . | 0.06 inches |
| 5 . | 0.03 inches |
| 6 . | 0.06 inches |
| 7 . | 0.125 inches |
| 8 . | Oil |
| 9 . | Water |
| 10 . | Dry |
| 11 . | 5.0 mm Notch Depth |
| 12 . | 0.125 inches |
| 13 . | 0.03 inches |
| Тип материала | Категория | Производитель |
|---|---|---|
| Quadrant EPP TIVAR® Ceram P | UHMWPE | Quadrant Engineering Plastic Products |
| Quadrant EPP TIVAR® Extrended Wear | UHMWPE | Quadrant Engineering Plastic Products |
| Quadrant EPP TIVAR® Uniblend | UHMWPE | Quadrant Engineering Plastic Products |
| UTEC 3041 | UHMWPE | Braskem |
| LubX® S pressed | UHMWPE | Röchling Engineering Plastics SE & Co. KG |
| Plaslube® PE 4000 LE | UHMWPE | Techmer Engineered Solutions |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved