- Главная страница
- Поиск продуктов
- HDPE
- DOWLEX™ 2342M
DOWLEX™ 2342M
| Категория | HDPE, Polyethylene Resin |
| Производитель | The Dow Chemical Company |
| Торговая марка | DOWLEX™ |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
GwWrhZ_DOWLEX-2342M.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
DOWLEX™ 2342M Polyethylene Resin is a high density ethylene/octene copolymer resin. It has a unique molecular structure with a linear polyethylene backbone and controlled octene side branches, which provides a combination of flexibility with very high toughness and stress crack resistance. A specified carbon black masterbatch is incorporated into the DOWLEX 2342M Polyethylene Resin during extrusion to arrive at a fully stabilised, homogeneous black sheet with excellent weldability. Sheeting thus produced meets the requirements of the Guidelines and Directives controlling general water barrier membranes such as the North Rhine Westfalia Guidelines or "Guideline for Plastic Membranes in Landfill sites" issued 7/92 from B.A.M. Berlin.
Processability: Typical extrusion temperature range for DOWLEX 2342M Polyethylene Resin is 190 to 230 °C. The resin contains processing stabilisers compatible with those in the Masterbatch added to guarantee short and long term processing, thermal and environmental stability including metal deactivators.
Applications:
Processability: Typical extrusion temperature range for DOWLEX 2342M Polyethylene Resin is 190 to 230 °C. The resin contains processing stabilisers compatible with those in the Masterbatch added to guarantee short and long term processing, thermal and environmental stability including metal deactivators.
Applications:
- Heavy sheeting.
- General water barrier membranes.
| Главная Информация | |
|---|---|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Плотность | ISO 1183 | ||
| -- 1 | 0.944 | g/cm³ | |
| -- | 0.932 | g/cm³ | |
| Массовый расход расплава (MFR) | ISO 1133 | ||
| 190°C/2.16 kg | 0.85 | g/10 min | |
| 190°C/5.0 kg | 2.6 | g/10 min | |
| Экологическое сопротивление растрескиванию (20°C, 2.00 mm, 10% Antarox, Compression Molded) | > 15000 | hr | ASTM D1693A |
| Твердость | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Твердость по суше (Shore D, 2.00 mm, Compression Molded) | 55 | ISO 868 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Tensile Stress | |||
| Yield 2 | 18.0 | MPa | ISO 527-2 |
| Yield, 2.00 mm, Compression Molded 3 | 16.0 | MPa | ISO 527-2/50 |
| Break 4 | > 30.0 | MPa | ISO 527-2 |
| Break, 2.00 mm, Compression Molded 5 | > 30.0 | MPa | ISO 527-2/50 |
| Растяжимое напряжение | |||
| Yield 6 | 12 | % | ISO 527-2 |
| Yield, 2.00 mm, Compression Molded 7 | 14 | % | ISO 527-2/50 |
| Break 8 | > 800 | % | ISO 527-2 |
| Break, 2.00 mm, Compression Molded 9 | > 800 | % | ISO 527-2/50 |
| Флекторный модуль- 2% Secant (2.00 mm, Compression Molded) | 550 | MPa | ISO 178 |
| Сопротивление разрыву 10 | > 750 | N | DIN 53356 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Время индукции окисления (210°C) | > 30 | min | DIN EN 728 |
| Пленки | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Сила прокола пленки 11 | > 7500 | N | DIN 54307 |
| Воздействие | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Зубчатый изод ударная прочность 12 | ISO 180 | ||
| -40°C, Compression Molded | 65 | kJ/m² | |
| 23°C, Compression Molded | No Break |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Викат Температура размягчения | 117 | °C | ISO 306/A120 |
| Примечание | |
|---|---|
| 1 . | Black 2.5 mm thick sheet extruded from DOWLEX 2342M Polyethylene resin with a specified masterbatch conforming to DIN 16776 as: "PE, EACK 35T022 or D006". Carbon black content: 2.0-2.2%. |
| 2 . | Black 2.5 mm thick sheet extruded from DOWLEX 2342M Polyethylene resin with a specified masterbatch conforming to DIN 16776 as: "PE, EACK 35T022 or D006". Carbon black content: 2.0-2.2%. |
| 3 . | Data are valid for MD and CD direction. |
| 4 . | Black 2.5 mm thick sheet extruded from DOWLEX 2342M Polyethylene resin with a specified masterbatch conforming to DIN 16776 as: "PE, EACK 35T022 or D006". Carbon black content: 2.0-2.2%. |
| 5 . | Data are valid for MD and CD direction. |
| 6 . | Black 2.5 mm thick sheet extruded from DOWLEX 2342M Polyethylene resin with a specified masterbatch conforming to DIN 16776 as: "PE, EACK 35T022 or D006". Carbon black content: 2.0-2.2%. |
| 7 . | Data are valid for MD and CD direction. |
| 8 . | Black 2.5 mm thick sheet extruded from DOWLEX 2342M Polyethylene resin with a specified masterbatch conforming to DIN 16776 as: "PE, EACK 35T022 or D006". Carbon black content: 2.0-2.2%. |
| 9 . | Data are valid for MD and CD direction. |
| 10 . | Black 2.5 mm thick sheet extruded from DOWLEX 2342M Polyethylene resin with a specified masterbatch conforming to DIN 16776 as: "PE, EACK 35T022 or D006". Carbon black content: 2.0-2.2%. |
| 11 . | Black 2.5 mm thick sheet extruded from DOWLEX 2342M Polyethylene resin with a specified masterbatch conforming to DIN 16776 as: "PE, EACK 35T022 or D006". Carbon black content: 2.0-2.2%. |
| 12 . | 2 mm thick |
| Тип материала | Категория | Производитель |
|---|---|---|
| PRIMALENE WPP790P | HDPE | Southern Polymer, Inc. |
| PRIMALENE WPP733 | HDPE | Southern Polymer, Inc. |
| SCLAIR® 2906 | HDPE | NOVA Chemicals |
| G-Lene PB48A004 | HDPE | Gas Authority of India Limited |
| Pexidan® L/T | HDPE | Saco Polymers |
| MARPOL® HDM 510-UV | HDPE | Marco Polo International, Inc. |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved