- Главная страница
- Поиск продуктов
- LLDPE
- Braskem PE SLL318
Braskem PE SLL318
| Категория | LLDPE, Linear Low Density Polyethylene |
| Производитель | Braskem |
| Торговая марка | Braskem PE |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
F3gxnO_BraskemPESLL318.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
Description:
SLL318 is a Linear Low Density Polyethylene, copolymer of butene-1. Developed for cast film extrusion. Films obtained with this product show good mechanical properties and enhanced sealability. It contains antioxidant additives.
The minimum biobased content of this grade is 87%, determined according to ASTM D6866.
Applications:
Stretch films; liners; LDPE and HDPE blends and packages for general use.
Others applications: blends for irrigation pipes; insulation for low and medium tension XLPE wires and cables.
Process:
Recommended processing conditions for film extrusion about 170 - 210 °C. The optimum processing conditions will vary according to the type of equipment used and cannot be considered as performance guarantee.
SLL318 is a Linear Low Density Polyethylene, copolymer of butene-1. Developed for cast film extrusion. Films obtained with this product show good mechanical properties and enhanced sealability. It contains antioxidant additives.
The minimum biobased content of this grade is 87%, determined according to ASTM D6866.
Applications:
Stretch films; liners; LDPE and HDPE blends and packages for general use.
Others applications: blends for irrigation pipes; insulation for low and medium tension XLPE wires and cables.
Process:
Recommended processing conditions for film extrusion about 170 - 210 °C. The optimum processing conditions will vary according to the type of equipment used and cannot be considered as performance guarantee.
| Главная Информация | |
|---|---|
| Добавка |
|
| Характеристики |
|
| Используется |
|
| Рейтинг агентства |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Плотность | 0.918 | g/cm³ | ASTM D1505 |
| Массовый расход расплава (MFR) (190°C/2.16 kg) | 2.7 | g/10 min | ASTM D1238 |
| Пленки | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Прочность на растяжение | ASTM D882 | ||
| MD : Fracture, 38 µm | 30.0 | MPa | ASTM D882 |
| TD : Fracture, 38 µm | 30.0 | MPa | ASTM D882 |
| Удлинение при растяжении | ASTM D882 | ||
| MD : Fracture, 38 µm | 1200 | % | ASTM D882 |
| TD : Fracture, 38 µm | 1400 | % | ASTM D882 |
| Флекторный модуль | ASTM D790 | ||
| 1% Secant, MD : 38 µm | 180 | MPa | ASTM D790 |
| 1% Secant, TD : 38 µm | 200 | MPa | ASTM D790 |
| Ударное падение Dart 1 | 90 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 38 µm | 120 | g | ASTM D1922 |
| TD : 38 µm | 340 | g | ASTM D1922 |
| Дополнительная информация | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Двуслойное содержание | > 87 | % | ASTM D6866 |
| Примечание | |
|---|---|
| 1 . | F50 |
| Тип материала | Категория | Производитель |
|---|---|---|
| MORETEC™ 0218CM | LLDPE | Prime Polymer Co., Ltd. |
| ALKAMIX™ MB6002 | LLDPE | Qenos Pty Ltd |
| Bynel® 41E762 | LLDPE | DuPont Packaging & Industrial Polymers |
| Flexirene® MR 50 U | LLDPE | Versalis S.p.A. |
| Pemex BDL 92020 C | LLDPE | Pemex Petroquímica |
| PROXESS 1806S3 | LLDPE | Braskem |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved