- Главная страница
- Поиск продуктов
- MDPE
- DOW™ MDPE DNDA-1796 NT 7
DOW™ MDPE DNDA-1796 NT 7
| Категория | MDPE, Medium Density Polyethylene Resin |
| Производитель | The Dow Chemical Company |
| Торговая марка | DOW™ MDPE |
| Порт | Китай Шанхайский порт |
| Торговые условия | FOB, CFR, CIF |
| Платежное средство | L/C, T/T, Western Union |
EGyUf8_DOW-MDPE-DNDA-1796-NT-7.pdf  |
|
| Контактная информация |  Служба поддержки клиентов Вичат |
|
|
|
Описание материалов:
- High melt strength
- Excellent low temperature toughness
- Good environmental stress crack resistance
- Excellent flex life
Industrial Standards Compliance:
- ASTM D 3350: cell classification PE224340A
- Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a.
- Complies with Canadian HPFB No Objection (With Limitations)
- Consult the regulations for complete details.
DOW DNDA-1796 NT 7 Medium Density Polyethylene Resin is produced using UNIPOL™ process technology. It is intended for use in flexible hose and tube applications. It also has utility in certain sheet applications and blow molding applications such as small, squeezable bottles. It exhibits high melt strength, excellent low temperature toughness, good stress cracking resistance, and outstanding flex life. It has a high molecular weight and a relatively broad molecular weight distribution that provides an excellent balance of performance properties and processability.
| Главная Информация | |
|---|---|
| Рейтинг агентства |
|
| Формы |
|
| Метод обработки |
|
| Физический | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Удельный вес | 0.939 | g/cm³ | ASTM D792 |
| Массовый расход расплава (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.60 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 40 | g/10 min | ASTM D1238 |
| Экологическое сопротивление растрескиванию | |||
| F0 1 | > 2000 | hr | ASTM D1693C |
| 50°C, 100% Igepal, F50 2 | > 1500 | hr | ASTM D1693 |
| Твердость | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Твердость дюрометра | ASTM D2240 | ||
| Shaw D 3 | 61 | ASTM D2240 | |
| Shaw D 4 | 56 | ASTM D2240 |
| Механические | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Прочность на растяжение | ASTM D638 | ||
| Yield 5 | 20.0 | MPa | ASTM D638 |
| Yield 6 | 19.0 | MPa | ASTM D638 |
| Fracture 7 | 21.4 | MPa | ASTM D638 |
| Fracture 8 | 20.7 | MPa | ASTM D638 |
| Удлинение при растяжении | ASTM D638 | ||
| Yield 9 | 4.0 | % | ASTM D638 |
| Fracture 10 | 700 | % | ASTM D638 |
| Fracture 11 | > 800 | % | ASTM D638 |
| Флекторный модуль | ASTM D790B | ||
| -- | 655 | MPa | ASTM D790B |
| 2% secant 12 | 600 | MPa | ASTM D790B |
| Воздействие | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Прочность на растяжение | 231 | kJ/m² | ASTM D1822 |
| Тепловой | Номинальное значение | Единица измерения | Метод испытания |
|---|---|---|---|
| Температура отклонения при нагрузке 13(0.45 MPa, Unannealed) | 55.0 | °C | ASTM D648 |
| Температура ломкости | |||
| -- 14 | < -95.0 | °C | ASTM D746A |
| -- 15 | < -76.1 | °C | ASTM D746 |
| Викат Температура размягчения | 120 | °C | ASTM D1525 |
| Температура плавления (DSC) | 126 | °C | Internal method |
| Пиковая температура кристаллизации (DSC) | 115 | °C | Internal method |
| Инструкции по экструзии |
|---|
| 软管和管子的制造条件： 螺杆类型：所有标准的商用挤出设备。 熔体温度范围：400-440 °F (205-225 °C) |
| Примечание | |
|---|---|
| 1 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 2 . | Carry out substrate molding and testing according to ASTM D 4976. |
| 3 . | Carry out substrate molding and testing according to ASTM D 4976. |
| 4 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 5 . | Carry out substrate molding and testing according to ASTM D 4976. |
| 6 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 7 . | Carry out substrate molding and testing according to ASTM D 4976. |
| 8 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 9 . | Carry out substrate molding and testing according to ASTM D 4976. |
| 10 . | Carry out substrate molding and testing according to ASTM D 4976. |
| 11 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 12 . | Carry out substrate molding and testing according to ASTM D 4976. |
| 13 . | Carry out substrate molding and testing according to ASTM D 4976. |
| 14 . | Prepare the compression molded fitting according to ASTM D 1928 procedure C. Attributes will vary with molding conditions and aging time. |
| 15 . | Carry out substrate molding and testing according to ASTM D 4976. |
| Тип материала | Категория | Производитель |
|---|---|---|
| TOTAL Polyethylene D3720 | MDPE | TOTAL Refining & Chemicals |
| TOTAL Polyethylene MDPE 3802 Blue | MDPE | TOTAL Refining & Chemicals |
| DOW™ MDPE 8818C | MDPE | The Dow Chemical Company |
| DOW™ MDPE NG 7525 | MDPE | The Dow Chemical Company |
| AEI SX734:CM488 | MDPE | AEI Compounds Limited |
| BorSafe™ ME3441 | MDPE | Borealis AG |
Получите информацию об этом продукте следующим способом.
| Телефон | +086 13424755533 |
| EMAIL US | sales@su-jiao.com |
Служба поддержки клиентов Вичат | |
Copyright © russianpolymer.com All Rights Reserved